Orthopedic casting splint brace plaster Comfortable splint 3rd generation

Product description
Instruction for Comfortable splint
Product structure, performance and scope of application:Comfortable splint consists of the upper and lower side of the non-woven fabrics and intermediate knitted polyester and cotton fabric that impregnated with a water-activated polyurethane resin. Polyurethane adhesive made of polyurethane, polyether diols and polyether triols etc. The product has these distinctive features: medium strength, shaping good, lighter weight, good air permeability, good X-ray translucency, easy operation, dismantling simple and so on. It applies to fixing and supporting the fracture site and the injured joints .It is ideal and upgrade product substitute for traditional plaster bandages. Application Methods:1. Choose appropriate size according to the injured area.2. After opening the pouch(Long roll type of splint cut the appropriate length as needed and immediately seal the end of the splint with a special clip), immerse the splint in room temperature water (20~30℃) for 5-10 seconds and squeeze it several times to make it fully saturated.3. After taking out the splint from water, squeeze or use dry towel to remove the redundant water.4. Put the splint on the parts that needs fixing, and wrap it with common gauze bandage or elastic bandage. To maintain proper tension is very important. If it is too tight, the blood circulation of the affected region will be disturbed; if it is too loose, the treatment effect will be affected.5. The splint can be molded after wrapping to make sure close fit with limbs.6. The operation time is generally within 3 minutes. Setting time is about 3-5 minutes and achieves functional strength in 30 minutes. Make sure the patient not to move the affected region before the product is fully hardened.7. Just cut the gauze bandage or elastic bandage, the splint will be dismantled.Cautions:◎After opening the package should be used immediately. Long roll type of splint cut the appropriate length as needed and immediately seal the end of the splint with a special clip to prevent splint in air become harden ◎Water soaking time and water temperature directly affect the curing time so doctors should be adjust according to the actual situation.◎This product uses sealed packaging, transportation and storage can’t leak. Before the opening should confirm the product that is harden or not .It can’t use when it becomes harden.◎The application of the splint must be under the operation or direction of the qualified doctor. Storage conditions:The product should be stored in a ventilated place at 15~30℃ and under 60% RH. The product should be inverted every half year.Production date, expiry date: Production date refers to product packaging and it should be used in the period of validity. The shelf life is three years.After Sales Service Commitment: Such as product hardening due to quality problems, can be replaced of the same size by local distributors.
Kangda Splint is used for orthopedics, which consists of a knitted fiberglass fabric and water-activated polyurethane resin.Specification and SizeType Code No. Size Package3inx12in KD312 7.5cmx30cm 20Rolls/Box3inx36in KD336 7.5cmx90cm 10Rolls/Box4inx16in KD416 10.0cmx40cm 20Rolls/Box4inx30in KD430 10.0cmx75cm 10Rolls/Box5inx30in KD530 12.5cmx75cm 10Rolls/Box5inx46in KD546 12.5cmx115cm5Rolls/BoxCharacteristics 1 20 times stronger and 5 times lighter than the traditional plaster cast2 Harden fast :functional stength will be achieved in 20 mins3 Good air-permeability ,Water-proof,Good X-ray radiolucence4 Easy operating and no harm to patients]StorageBe careful not to break the package.Store KANGDA Splint(Poly) at room temperature. NOTE: Storage at higher lower temperatures may affect the shelf-life and handing properties of the product.Damaged products by careless handing cannot be replaced. Please handle and store them carefully.The shelf-life of KANGDA Splint(Poly) stored by the above method is about two years.Operation1.After opening a bag, soak the whole set into lukewarm water for 2030 seconds.2.Wipe-out excess water on both sides with dry cloth3.Attach GR-2000 splint to affected area and apply the bandage around splint to fix.4.All the above process will take only 5 minutesRecommended Amount of UsageSize Use2inChildren's hands, fingers, and toes3inChildren's wrists, ankles, and arms and legs4inChildren's legs and ankles, adults hands and wrists5inAdult's arms and legs6inAdult's arms and legsWarning1. The higher the water temperature is, the faster KANGDA Splint(Poly) hardens.2. The setting time becomes shorter as the water absorption time increases.3. KANGDA Splint(Poly) can be used without immersing it in water if slow setting is needed. It may take approximately 15 minutes for the splint to harden without immersion in water.4. The thick side of non-woven fabric should be applied to the desired area of the patient

Packing & Delivery
Box size: 47*23*20cmCarton size: 70*50*42cm
All the international express and transportation is available with best price and service.



Model
Specification
Package
ST312
7.5cmx30cm
20bagsx6boxes/carton
ST335
7.5cmx90cm
10bagsx6boxes/carton
ST415
10cmx40cm
20bagsx6boxes/carton
ST420
10cmx50cm
10bagsx6boxes/carton
ST430
10cmx76cm
10bagsx6boxes/carton
ST530
12.5cmx76cm
10bagsx6boxes/carton
ST545
12.5cmx115cm
5bagsx6boxes/carton
ST630
15cmx76cm
5bagsx6boxes/carton
ST645
15cmx115cm
5bagsx6boxes/carton
Company Information
Beijing Jinwei Kangda Medical Instrument Ltd. was founded in 2001, which specialize in these products’ research and development, production, sales at home and abroad. We are the supplier of the central materials reserve, China MEHOCO CO., LTD’s export and military material procurement. The company has 24 production lines of casting tape and splint, as well as 20 production lines of body protector, orthosis brace. Jinwei Kangda as the high-tech enterprises has won a number of national patents and quality excellent award of Beijing. All the products have ISO, CE and FDA certificates. Our products are used in thousands of hospitals in China and exported to Europe, Middle East and Southeast Asia and more than 30 countries, we are the largest base of orthopedic casting tape and splint research, manufacture, exportation in Asia.Sincerely welcome companies at home and abroad contact and cooperate with us to realize complementary advantages, win-win cooperation and harmonious development together. Company address: Room 1406-1409, 1st Building, No.14 Courtyard, South Road of Western 3rd Ring-Road, Fengtai District, Beijing 100073, China.
Our Exhibition
Our service
Our service

1. Free sample.2. Small order acceptable.3. FOB, CNF, CIF, EXW terms available.4. 3rd part product inspection is acceptable.5. Manufacturer with competitive and stable price.6. OEM & ODM service with more options on color, size and packing etc.7. Shipping and express will be tracked and reported at any time after sending.8. Good after-sale service, we take care complaints as we want to be your long-term supplier.
Our advantageOne-stop service.All the products are approved by CE, ISO9001, ISO13485 and FDA.Supplier of Chinese Army and government.3 years of warranty period with reliable quality, accept changing of goods with problems any time, confidence in quality because of 15 years of professional manufacturing and exportation, over 200 experienced workers and management.The factory covers an area of 28,600 square meters and 11,600 square meters building area with 24 production lines of casting tape and splint, produce over 10 millions of products each year.Export to over 30 countries in Europe, Asia, and North America etc for 15 years.
OEM option
Main fabric
Fiberglass tape/ Polyester tape/ Polyester cotton
Color
White/ Green/ Red/ Yellow/ Blue
Carton and box size
As request
Sticker
As request (customized)
Packing
Silver neutral pack/ White pouch hole packing special pack
Port
As request
Our Certifications
All the products are approved by CE, ISO9001, ISO13485 and FDA