Alarm Wireless Alarm Fishing Bite Alarm

Two-way Anti-theft and Illuminated LED Wireless Carp Bite Alarm Ourcompany was founded in 2005, mainly designed and developed phishing alarms. We focus on high quality, high quality and practicality. We are the manufacturer of professional phishing alarms. Our products are long-lasting, beautiful and safe. If you are interested in our products or have any questions about the products. You can contact us and we are happy to serve you. If we have a problem with the product, we promise to resend the new product for you as soon as possible.
These occlusion alarms are dominated by a black outer casing.
If you can order more than 200 sets, your logo can be put on the bite alarms and case.Bite alarm units:
l8 tones settings
l8 volume settings
l5 sensitivity settings
l15 sec latching LED
l6 colors clear LED choices
lRunning LED (all are green)
lPush button LED dimmer
lBlack satin smooth finish
lAnti-Theft
lColorful light rollers
l150-200 meters
lOperates with the 9V batteries
l2.5mm jack socket
lMemory function in bite alar
lHeight adjustable
lLow battery function
lCan change roller wheel light color
lCan adjust the brightness of night light
Alarms User Instructions
Power on/off switch
Press the ON/OFF button on the right of the transmitter to turn on
or turn off the transmitter.
Volume adjustment
Press the volume control “V”to step through the 8 volume settings ,
ranging from low to high and silent mode .
Tone adjustment
Press the tone adjustment button “T”to step through the 8 settings .
Night light brightness adjustment
Press the ON/OFF button on the transmitter to adjust the brightness of
The night light(also called roller wheel light)
Sensitivity adjustment
Press the sensitivity adjustment button “S”to step the 5 sensitivity settings ,
ranging from Minimum to Maximum
mode.1 beep equals maximum sensitivity to 5 beeps minimum sensitivity .
Run indication / Low battery indication
When magnet roller wheel is activated . Both LED’s will be illuminated . The latching LED will illuminate for 20 seconds
and the run LED illumination stops when the roller wheel finishes rotating ./ Run LED on bite alarm
will flash /blink once every 5 seconds when battery low .
Change the roller wheel color
Press the V and T buttons at the same time to change the color of the roller wheel. There are six colors for your choice.
Receiver units:
l8 volume settings
l8 tone settings
l6colors clear LED choices
lVibration mode/Silent mode
l6 LED dimmer
l200 meters
lMemory function in receiver
lLearn and erase code
lLow battery warning
lOperate with 1.5 V * 3 batteries
lCan match with 6 alarms
Receiver User Instructions
Power on/off switch
Press the ON/OFF button on the right of the receiver for several seconds
to turn on or turn off the transmitter.
Volume adjustment
Press the volume control “V”to step through the 8 volume settings ,
ranging from low to high and silent mode .
Vibration adjustment
Press the vibration button “O”to choose vibration mode on or off.
Low battery indication
The first latch LED on remote receiver will flash/blink once every 5 seconds when battery is low .
Thereceiver control the bite alarm:Press“vibration “button 3s, heard the sound 2 times, and see the green LED light, that means the two-directional function is turned on.
Then press “P “key to select which bite alarm to control, after you choose the LED light on receiver, can press “V ”to change transmitter volume, short press “vibration “to change tone. Short press power button on the right to change sensitivity. Press “T ”key until hear sound 2 times, and red LED indicate light, that means anti- theft function is turned on , short press “T “key will be turned off.
Press the “vibration”button 3s, turn off the two-directional function.
Technical specification:
Transmitter
Receiver
Power Voltage : 9 V
Power voltage : 1.5 V *3
Standby Current : 20 uA
Standby Current : 0.5 mA
Working current : 50 mA
Working current : 22 mA
Shut down current : 0 mA
Shut Down Current : 12 uA
Working Power : 10 dB
Receiving Sensitivity : -100 db
Frequency : 470 MHz
Frequency : 470 MHz
Coverage range : 200 m
Coverage Range : 200 m
Working Temperature :-10 ~70 ℃
Working Temperature :-10 ~70 ℃
Company ProfileWe also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.