Chinese physiotherapy equipment cold air pressure therapy system

Chinese physiotherapy equipment cold air pressure therapy system
Product Description
*The Evercryo series cryo cuff with cooler is a newest medical device that
compression with cold.
*This equipment are widely used in Medical Institutions, home, gym, and so on.
*It has remarkable effect in the treatment of the pain, Inflammation, high fever and swelling.
Cold Therapy System is convenient, quiet and easy-to-use, delivering cold therapy when and where you need it. The single easy fill instructions make this motorized device perfect for use in the clinical setting, or home.
Product Parameter: MaterialTPU ColorBlue and BlackNet WeightM:0.31KG/PC for cuff only,1.37KG/PC for cuff with coolerGross WeightM:0.41KG/PC for cuff onlu,1.57KG/PC for cuff with coolerOEM/ODMAvailableApplicationfor medical, hospital, home, gym use.,etcUseColdFunctionMinimizes hemarthrosis, swelling and painIndicationIdeal use for acute sprains, trauma, post-op,and rehabilitation.
Feature:
1,Main compression are cooler and cuff, there are 10 different types for each body part.
2,It is a combination of cryotherapy and static compression, commonly uses for the treatment of
pain and inflammation after acute injurry or surgical procedure.
3,Anatomically designed to completely fit the injured part. Safe, comfortable and no stimulation for
the affected part.
4,Compare with the traditional cold therapy. it is easy to operate and use.
Far more than just a modified cooler, it was designed holistically, with unique features like a locking lid to help prevent spills and insulated walls for improved cooling.
Operation:The cooler is filled with water and ice and the cuff is placed on the injured part. Elevating the cooler forces cold water into the cuff and compresses the injured part. The higher the cooler is elevated above the injured part the more water will flow in to the cuff. Body heat will warm the cuff within 15-30 minutes. The warmed water is then drained by attaching the tube and the water is emptied into the cooler knee for a couple of minutes. The cooler is then reattached and elevated and cold.
water flows back into the injured part. The cuff should be emptied and refilled every hour while awake.

1. Prepare cooler: Connect the blue tube to the cooler. Add cold water.
to the line inside the cooler, then add ice to the top of the cooler. Allow 5 minutes with occasional shaking to chill the water.2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.4. Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Allow a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process.
Main Products
Pulse Compression Cold
Therapy System Cold Compression Wrap Waterproof Cast Bandage Protector
Company Information
Chengdu Cryo-Push Medical Technology Co., Ltd. is a professional company committed to the bone division, rehabilitation division and physical treatment. Our company is a high-tech enterprise combining the R&D, production and sales of medical equipment and supplies. Our company is located in cross-strait science and technology industrial development park, Wenjiang area, Chengdu city. Equipped with excellent production technology, strong technology strength and the excelsior professional dedication, our products have established a good reputation in medical institutions all over the country.
Certification
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have special requirement, we can customize packing specially for you.Q2. What is your terms of payment?
A: You can pay for the order by T/T or L/C.Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.Q4. How about your delivery time?
A: Sample order 2-4 working days, bulk order 7-10 working daysQ5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.