Physical Medical Cold Head Migraine Pain Relief Machine Head Physiotherapy Equipment

Physical Medical Cold Head Migraine Pain Relief Machine Head Physiotherapy Equipment
Product Description
Occasional headaches are something most people deal with. But if you have chronic headaches or migraines, you know how debilitating they can be.
One strategy that’s often recommended for headache and migraine pain is ice packs. Applying a cold compress or ice pack to your head or neck is believed to have a numbing effect, which may dull the sensation of pain.
The EVERCRYO Head Physiotherapy Equipment Cryo Cuff Cooler is specially design for the head pain relief.
The head cryo cuff cooler is consisting of two basic parts: cooler and cuff. The cooler is filled with tap water and ice, the cuff is applied and connected to the cooler, and the cooler is lifted above the cuff. Soothing cold water envelopes the affected area reducing migraine and headache. With the automatic circulation system,the cold water in the cooler cyclically flow into cuff and maintains pressure necessary to help prevent hemarthrosis and provide cryotherapy.
Universal to all Cryo Cuff models, the Cryo Cooler holds water and ice needed for six to eight hours of cryotherapy.
Components:
All Cryo/Cuffs can be ordered as a single cuff, or with a cooler (including a tube assembly and pump system ). The Cooler is available separately and can be used with any model in the Cryo/Cuff line.
Cuff: covers the body part(include ten parts,such as the head, shoulder, elbow, hand and wrist, back, thigh, knee, calf, ankle) with pressured ice water
Cooler:Head:29cm,Diameter:19cm,Measures:3.87L, holds enough water and ice for 6-8 hours of cryotherapy.
Tube: exchanges the water between cuff and the cooler
Automatic circulation system: make the water in the cooler flow into the cuff intermittently
Application:
The Evercryo series cryo cuff with cooler is a new medical device that combines compression with cold to control swelling, edema, hematoma, hemarthrosis, and pain in the joints . Simplicity of design and ease of operation makes it ideal for the medical institutions,plastic operation,gym,home and so on. Such as follows:
l Post Operative
l Plastic Surgery
l General Surgery
l Arthroscopic Procedures
l Reconstructive Procedures
l Chronic Pain
l Physical Therapy
Product Features
The cooler may be detached from the cuff at any time during treatment without interruption of cryotherapy
Less dependence on pain-relief
Faster recovery time
Cooler holds water and ice needed for 6-8 hours of cryotherapy
Compatible with all Cryo/Cuffs
Includes tube assembly and insulation disk
To be used in conjunction with Cryo/Cuff to provide compression and cryotherapy to affected area
Operation Guide
Operating principle
The cooler is filled with water and ice and the cuff is placed on the injured part. Elevating the cooler forces cold water flow into the cuff and compresses the injured part. The higher the cooler is elevated above the injured part the more water will flow in to the cuff. (or use automatic circulation system to pump ice water into cuff automatically and circularly)
Usage1. Prepare cooler: Connect the blue tube to the cooler. Add cold water to the line inside the cooler, then add ice to the top of the cooler. Wait 5 minutes with occasional shaking to chill the water.
2. Apply the cuff: Always apply it empty. Secure the top strap, snug but not tight. Adjust the front opening so the cuff fits the slightly injured part. Secure the bottom strap loosely. Do not stretch the elastic.
3. Fill and pressurize: Connect the tube to the cuff. Open the air vent on the cooler. Elevate the cooler and hold for about 30 seconds to pressurize the cuff. The cooler can now be disconnected by pressing the metal tab on the quick – disconnect while the cooler is elevated to seal the pressure.
4.Rechill: Rechill the water once an hour or as needed. Connect the tube,lower the cooler and the warmed water will drain from the cuff into the cooler. Wait a couple of minutes for the water to mix with the ice and rechill, then elevate the cooler and repeat the filling process. (Step 3)
Clean & Storage:
When you are not using the cuff and cooler, you need to drain all the water out of the cuff, tubes, and the cooler.
1. Connect the tubes and drain the cuff into the cooler.
2. Take the tubes apart at the metal tab. Lift the cuff tube up while pressing on the metal tab to drain out any water in the tube.
3. Drain the water out of the cooler. Lift the tube on the cooler to drain the water out of it.
4. Leave the cover off the cooler unit to let it dry.
Special Notes:
Check the skin under the cuff to be sure it is not damaged by the cold.
Do not raise the cooler higher than 15 inches above the cuff because it may cause too much pressure in the cuff.
If you have any increase in pain, numbness or tingling of the arm, check that the cuff is not too tight, or too full. If you adjust the cuff and the pain, numbness or tingling do not ease, call your doctor.
one cooler can use together with different models' cuff, here are the other optional parts:
Packaging&Shipping
Packagingvalve bag for each cuff and cooler, paper box for circulation system, then all packed in a cartonCarton size: 61.5*33.4*33cm, 6.2kgs( include 1 cooler, 10 cuffs and 1 circulating pump)Lead Time2~5 working days for sample, 20~30 working days for bulk orderDelivery MethodBy sea, by air or express, according to customers' requirements
Company Information
about Us
Chengdu Cryo-Push Medical Technology Co., Ltd., established in 2012, is a professional manufacturer engaged in the research, development, production, sale and service of 8 series physical therapy equipments:
cold wrap,
cold compression wrap,
continuous cold therapy system,
electric far infrared heating brace,
continuous heat and cold therapy system
waterproof cast & bandage protector,
disposable catheter holder,
Knee Brace.
we have obtained CE, FDA certificates for most products, right now we are applying for the ISO13485. What's more, our company has introduced a series of advanced equipment including High frequency welding machine, hydraulic punching machine, filling machine, flat seaming machine, automatic sealing machine, air compressor.
We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.
In the future, Cryo-Push is confident to be a First-class enterprise in the field of Health and medical rehabilitation. we are glad to make friends all over the world and keep a long-term win-win business relationship.
Our Factory
At Exhibition
Certificates
Our Services
With years of export experience along with excellent quality, advanced services and competitive prices, Cryo-Push has won numerous customers' trust and support. We provide our customer below service:
1. All the inquiries will be replied within 24 hours
2. Considerate after-sales service, please feel free to contact with us if you have any problem.
3. We are factory, OEM/ODM is no problem
4. The product MOQ is 1 piece, you can try it first
5. 1 year warranty for our products, free maintenance in warranty period
6. We accept flexible and diverse forms of payment: T/T, WestUnion, Paypal, Alibaba Trade Assurance and so on.
Any question, Click Here to Consult!
Hot Sale Products
cold wrapcervical neck traction devicefar infrared heating padwaterproof cast&bandage protector
new style waterproof cast&bandage protectorpulse cold compression therapy system