semi auto solar panel laminating 2211 2222

semi auto solar panel laminating 2211 2222

for solar pv assembly Production line
(Solar module producing line Turkey project)
Solar Panel Laminator Area: 1100*2200mm;1800*2200mm;1800*2600mm;2200*2200mm;2200*2400;2200*2600mm
REMARKS: We can design and manufacture all kinds of solar Panel laminator according to customer requirements.
Model Laminating area
Dimension (mm) weightKL-C1 2200*1100mm 2590x1550x1250
3T KL-C2 2200*1800mm 2590x2250x1250
4TKL-C3 2200*2200mm 2650x2590x1250
5TKL-C42400*2200mm2720x2830x1350
6T
Solar Panel Laminators Technical Parameters
Cooling water flow needed
2L/min
Laminating height
25mm
Total power of equipment
33KW
Operation Controlling mode
Manual/automatic
Heating mode
Oil heating
Temperature control
Intelligent temperature
Temperature uniformity in working area
≤ ±1.5°C
Temperature control accuracy
≤ ± 1°C
Temperature control range
30 °C~180 °C
Pumping speed
30 / Seconds
Laminating time
14 min (Including Curing time)
Operating vacuum degree
20-200Pa
Exhuasting time
4-6 min
Solar Panel laminator Selling pointsIntelligent temperature control system makes the temperature more homogeneous and easier set and control.Solar laminating pressure is adjustable and can be adjusted according to the process, which makes the quality of modules better.It Could work continuously in high temperature for 24 hoursThe advanced touch screen operating platform makes it more intuitive to operate, makes it respond more quickly, make the performance more stable and the failure rate is further reduced.Appling a fully humanized operating procedure.the equipment is equipped with many detection switches,in the normal production, operators will only be required to put the modules on the heating platform and press the cover switch, the equipment will automatically laminate, cure and open cover automatically and wait for operator to start the next procedure.
Other related solar machines:
EL Tester (solar laminator)
Effective test range:1200*2100mm Resolution:1.4 Megapixels
Test Time: 1s~60s can be set Test Methods: un contact free style Power:220V/10A/1PH Camero: imported
Solar panel tester
Light intensity:100mW/cm2
Light intensity non-uniformity:≤±2%
Light intensity instability degree of irradiation:≤±2%
Test results consistency:≤±0.5%
Test error of electrical properties:≤1%
Single flash time:10ms
Effective test range :2000x1200mm/5W-300W
Measuring voltage:10V-100V(resolution 1mV)
Measuring current:0-20A(resolution 1mA)
Test parameters:Isc,Voc,Pmax,Vm,Im
FF,EFF,Temp,Rs,Rsh"
Solar Panel Lamination area:2200*2200/2200*1100mm
Laminated Cavity Height:25mm
Control Mode:The auto/hand-switch
Quick heating,good temperature uniformity
Germany Simens PLC,high temperature control precision; Taiwan touch screen control
Control relay :OMRON
Solar frame Machines
Framing size: Min:350x500*35MM Max:1150x2100*500MM without bump horny Air cylinder, linear rail, steel structur
Solar cell tester
Light intensity:100mW/cm2
Light intensity non-uniformity:≤±2%
Light intensity instability degree of irradiation:≤±2%
Test results consistency:≤±0.5%
Test error of electrical properties:≤1%
Single flash time:10ms
Effective test range :200x200mm/0.1W-5W
Measuring voltage:0V-0.8V(resolution 1mV)
Measuring current:0-20A(resolution 1mA)
Test parameters:Isc,Voc,Pmax,Vm,Im
FF,EFF,Temp,Rs,Rsh
Our customer used Pictures
♥♥♥ Contact Simmer
Jiangsu Keyland Laser Tecnology Co.ltd
Tel: +86-27-87970567 / Mobile+86-15926481511 Fax: +86-27-87970568
Skype:simmer991
Website: http://en.keylandlaser.com/
Looking for solar laminator agent, If you are intereting in it, pls contact me freely.