kingshine crees cxb 3590 100w 150w 200w 250w 300w 450w diy led grow light kits with cxb3590 cob grow

SpecificationPin fin heatsinkD133 x H70 mmTrickness35mmMaterialPure Aluminum 1070
Surface Treatment
black is normal anodizeUsage
Fit with CXB3590 COB
Fit with CITIZEN CLU048
Fit with Bridgelux Vero 29 COB
Warranty2 yearsOriginal CREE Cob CXB3590 CD.
The XLamp CXB3590 LED Array is the brightest member of the second generation of the CXA family that delivers up to 30% higher efficacy and up to 20% higher lumens than the first generation in the same LES. The higher performance second generation CXA LED Arrays provide a drop-in performance upgrade to existing CXA LED designs to shorten product development time. Available in 2-step, 3-step and 5-step EasyWhite bins, the CXB3590 LED delivers high lumen output and high efficacy in a single, easy-to-use package that eliminates the need for reflow soldering.


The CX Family LED Design Guide provides basic information on the requirements to use the CXB3590 LED successfully in luminaire designs.
Product DescriptionThis kit contains the following components:


1pcs of Pre-drilled Pin fin heatsink Φ133*H70mm(for 40-60W)
1pcs of Original CREE COB CXB3590 3500k 80cri 36v
1pcs of thermal tape
1pcs of Ideal holder 50-2303CR
1pcs of D100mm glass lens ( 90degree or 120degree option )
1pcs of MW led driver LPC-60-1400
Cables + Screws
This kit contains the following components:
3pcs of Pre-drilled Pin fin heatsink Φ133*H70mm(for 40-60W)

3pcs of Original CREE COB CXB3590 3500k 80cri 36v

3pcs of thermal tape
3pcs D100mm glass lens with 90degree (or 120degree )
3pcs ideal holder for cree cob
4pcs ofWago 221-412 quick connectors
1pcs of Meanwell led driver 150w HLG-120H-C1400B
Cables + ScrewsThis kit contains the following components:
4pcs of Pre-drilled Pin fin heatsink Φ133*H70mm(for 40-60W)
4pcs of Original CREE COB CXB3590 3500k 80cri cd bin 36v
4pcs of thermal tape
4pcs of Ideal holder 50-2303CR
4pcs of Ideal adapter 50-2300AN andReflector KS-D82-RF
5pcs of Wago 221-412 quick connectors
1pcs of Meanwell led driver HLG-185H-C1400B
1pcs of 100K linear potentiometer
Cables + Screws
This kit contains the following components:
5pcs of Pre-drilled Pin fin heatsink Φ133*H70mm(for 40-60W)
5pcs ofOriginal CREE COB CXB3590 3500k 80cri cd bin 36v
5pcs of thermal tape
5pcs of Ideal holder 50-2303CR
5pcs of COB D100mm glass lens
6pcs of Wago 221-412 quick connectors
1pcs of meanwell led driver 240WHLG-240H-C1400B
1pcs of 100K linear potentiometer
Cables + Screws
6 cob cxb3590 3500k with glass lens kits :
6pcs of Pre-drilled Pin fin heatsink Φ133*H70mm(for 40-60W)
6pcs of Original CREE COB CXB3590 3500k 80 CRI CD in 36V
6pcs of D100mm glass lens (90degree ,120degree option )
6pcs of Ideal holder 50-2303CR
6pcs of thermal tape
7pcs ofWago 221-412 quick connectors
1pcs of 100K linear potentiometer
1pcs of meanwell led driver HLG-320H-C1400B
Cables + Screws
This kit contains the following components:

9pcs of Pre-drilled Pin fin heatsink Φ133*H70mm(for 40-60W)
9pcs of Original CREE COB CXB3590 3500k 80 CRI CD in 36V
9pcs of Ideal 50-2300AN and Reflector KS-D82-RF (or CREE COB D100mm glass lens )
9pcs of Ideal holder 50-2303CR
9pcs of thermal tape
10pcs of Wago 221-412 quick connectors
1pcs of 100K linear potentiometer
1pcs of MW led driver HLG-480H-C1400B
Cables + Screws

Single cxb3590 3500k grow light with HBG-60-1400 lde driverMW driver HLG-320H-C2100B Connect with 4 cobs and D163mm heat sink :

-- 4pcs of Pre-drilled Pin fin heatsink Φ163*H70mm (for 75-85W)
-- 4pcs of Original CREE COB CXB3590 3500K 80CRI CD Bin 36v
-- 4pcs of Reflector KS-D82-RF and Ideal adapter50-2300AN (or D100mm glass lens )
-- 4pcs of thermal tape
-- 4pcs of Ideal holder 50-2303CR
-- 5pcs of Wago 221-412 quick connectors
-- 1pcs of meanwell led driver HLG-320H-C2100B
-- 1pcs of 100K linear potentiometer
-- Cables + Screws
MW driver HLG-480H-C2100B connect with 6 cobs and 163mm heat sink :

6pcs of Pre-drilled Pin fin heatsink Φ163*H70mm(for 75-85W)
6pcs of Original CREE COB CXB3590 3500k 80 CRI CD in 36V
6pcs of cxb3590 cob D100 mm glass lens with 90degree (or reflector )
6pcs of Ideal holder 50-2303CR
6pcs of thermal tape
7pcs of Wago 221-412 quick connectors
1pcs of 100K linear potentiometer
1pcs of meanwell led driver HLG-480H-C2100B
Cables + Screws

Pre-drilled heatsink for CXB3590 :

Feedback from our customer :about heatsinkSide flat cold forging heatsink for led light/pin fin heatsink.

Heat sinks are used to enhance heat dissipation from hot surfaces. A heat sink does this by increasing the surface area that is in contact with the cooling fluid or air.From board level heat sinks, to LED heat sinks, to high power heat sinks,our goals are to provide you the best heatsink that is the most cost effective and highest quality. Our employees will see that we do whatever we can to make this happen.
Our heatsink capabilities:

D120mm*H70mm (for 30-45W) :D133mm*H70mm (for 40-60W) :D140mm*H70mm (for 50-65W) :D150mm*H70mm (for 60-75W) :D163mm*H70mm (for 75-85W) :D180mm*H70mm (for 95-105W) :D125mm*125mm*60mm (for 80-100W)
ApplicationsCompany InformationFAQQ1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?

A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.

All of above kit has glass lenses and reflector to option ,pls tell us you demand and which power .Thanks in advance !