2% air loss Blower purge desiccant compressed air dryer

Blow purge desiccant compressed air dryer --KL air dryer factory provide the satisfying product and service!
Product Description
KXD heatless type desiccant dryer with 100W electrical comsume. with 14% air loss;
KXR Heated type with heater, 6% air loss 1000CFM power is 12KW;
KXB Blower purge with heater & air blower, air loss only 0~2% the intallstion power is more than heated type;
KXC Heat of compression dryer with 100W power consume, but the inlet temperature need at 120~170Deg.C
Blow purge desiccant compressed air dryer:
1.Max inlet temp.:45Deg.C;
2.inlet oil content: 0.01ppm
3. Rated Pressure:7bar
4.Working pressure:4~10Bar
5.Ambient temp:42Deg.C
6. dew-point -40~-70PDP
7.air loss 2%
8. System cycle time: 4hours
9.PLC controller & touch screen
Company Information
KL company are the manufacurter here with over 17 years' experiences, export business since 2001.
With about 120workers and 13000m3 factory. Company with CRM and ERP software manager system. Production standard as ISO9001 and 6S .
RIght now, KL in China with 13branch office ,respnsible for sales, tech-support and after-service, For international martker, about 100sets air dryer for export per month.
KL have been export the dryers & chillers to about 50 countries, can professional providing filtration,Separation and Purification solutions for your compressed air purifying management needs!
Exhibition:
Our Services
The guarantee period for KL air dryer is 12 months dating from delivery date .During this time, KL submit after-service when damage occurred not by people.
Any delay in installation due to project, you may contact KL sales team to know the situation, KL company could extend the guarantee period but not longer than 16months after shipment date.
KL quality control---6S factory manage and ISO9001:2008
1.Components quality check;
2.Quality check in production;
3.Finally quality check before shipment, keep the testing report
Pls kindly send it with below technical information , that's better for us quickly feedback your inquire:
1) Flow rate: _____Nm3/min
2) Working pressure:_____Bar
3) Working temperature: _____
4) Pressure dew-point :______
5) Air loss:______
6) Application: _______(Acti-exlosion or standard type)
7) others:_________Stainless steel material or standard type/ ASME or PED vessel
8): Voltage:___________
Any Inquiry or any question, pls contact:
Jamie Xu--working in KL team 11years.
Hangzhou Kelin Aier Qiyuan Equipment Co.ltd
Main Product: air dryer & water chiller & gas generator etc.
Add:Anxi Industrial Zone,Liangzhu,Yuhang,Hangzhou,China
Tel :+86-571-88790788
Fax:+86-571-88792222
Mobile:+86-15906676923
Email:jamie(at)china-air-dryer.com
Website:www.klqy.com