Hot sale home brewing mini 5L keg co2 regulator and beer dispensing system
Product Description
Customized logo
Packaging & Shipping
Trouble shooting
Trouble shooting
Solution
Leaks gas as soon as the cartridge is installed
1.Make sure the regulator dial is off turned all the way counter close
2.Tighten the cartridge seal
Replace the CO2 cartridge it is damaged
The tap is open, but no beer comes out
Make sure the CO2 cartridge is installed, the cap is turned on, and pressure is indicated on the pressure gauge.
Tap continues to drip ,
without stopping when closed
1.A few drips after closing the tap is normal. But it should not drip over time.
2. If the keg and tapping system is clean, internal O-ring may have worn through use and be in need of replacement.
Beer pours foamy every time (more than1/4 cup of foam)
1.First pour may be foamy if the beer line is full of air after being filled or the tap assembly has been allowed to warm up. Second beer should pour fine, if that's the case. Keep out of the sun.2.Beer may be highly carbonated from the bar or brewery. If beer in keg is pressurized at 5 psi but came from brewery beer line pressurized at 25 psi, beer will pour foamy until the pressure equalizes after few days in the keg.Be sure to open the tap handle fully and let go during the pour. Attempting to meter the flow during the pour can lead to foaming.
1. If you have any problems about your beer, you can leave message to us. we would like to use our experience to help you.
2. We will appreciate if you can send us some advice.