ET3310 Dual Channel Function Generator 10MHz Arbitrary Waveform Generator 160MSa S 12Bits

ET3310 Dual Channel Function Generator 10MHz Arbitrary Waveform Generator 160MSa/S 12Bits

Product Description
3.5-inch 480×320TFT LCD with clear graphic interface
Chinese / English menu available
Press key for help and information
File management supporting USB flash disk and local storage
Key features
For two-channel output, the highest output frequency is: ET3310 Model is 10MHz,ET3325 Model is 25MHz , ET3340 Model is 40MHz
,ET3360 Model is 60MHz,ET3370 Model is70MHz
The two channels are independent from each other and have the function of phase synchronization
Sampling rate of 160MSa/S, vertical resolution of 12 bit and storage depth of 16k
Five basic waveforms and 32 arbitrary waveforms in-built
Waveform storage: Supports 10 user-defined set of waveform editing
Pulse wave output set in edge time
Internal/external AM, FM and FSK modulation function
Output of linear/logarithmic frequency sweep and burst waveform
Frequency meter of high precision of 160MHz
With RS232 interface, USB Device, USB Host interface supporting USB flash disk storage
Multi-functional arbitrary waveform editing software equipped
Frequency Characteristics
ET3310
ET3325
ET3340
ET3360
ET3370
Waveform types
Sine, square, triangle, pulse, noise and arbitrary waves (including DC)
Sine
1uHz ~ 10MHz
1uHz ~ 25MHz
1uHz ~ 40MHz
1uHz ~ 60MHz
1uHz ~ 70MHz
Square
1uHz ~ 5MHz
1uHz ~ 5MHz
1uHz ~ 10MHz
1uHz ~ 10MHz
1uHz ~ 10MHz
Triangle
1uHz ~ 500kHz
1uHz ~ 500kHz
1uHz ~ 1MHz
1uHz ~ 2MHz
1uHz ~ 2MHz
Noise (-3dB)
7MHz Bandwidth
Pulse
100uHz ~ 5MHz
100uHz ~ 10MHz
Arbitrary wave
1uHz ~ 5MHz
1uHz ~ 10MHz
Sine Wave Characteristics
0~1MHz: <-45dBc
Harmonic distortion
1MHz~10MHz: <-40dBc
>1Vpp
10MHz~20MHz: <-30dBc
0~1MHz: <-45dBc
20MHz~40MHz: <-25dBc
1MHz~40MHz: <-40dBc
Total harmonic distortion
<0.2% (20Hz-20kHz, 1Vpp)
Square Wave Signal Characteristics
Rise/fall
<20ns
Time
Overshoot
<5%
≤100kHz: 1%~99%;
Duty cycle
≤5MHz: 20%~80%;
≤10MHz: 40%~60% (0.1% resolution)
Dissymmetry
1% Period + 5ns
(50% duty cycle)
Jitter
6ns +0.1% Period
Ramp Wave Characteristics
Linearity degree
≤0.1% Peak output
Symmetry
0.0~100.0%(resolution 0.1%)
Pulse Wave Characteristics
Pulse width
Min 20ns;1ns resolution
Edge transition
time
Min 20ns
Overshoot
<5%
Jitter
6ns +0.1% Period
Arbitrary Wave Characteristics
Channel
CH1
CH2
Sampling speed
160MSa/S
160MSa/S
Waveform amplitude
resolution
12bits
10bits
Waveform length
16k
4k
Minimum rise/fall time
<20ns
<20ns
Jitter
6ns+30ppm
6ns+30ppm
Storage quantity
10 waveforms
10 waveforms
Output Characteristics
Amplitude (50Ω)
1mVpp~10Vpp ≤20MHz
Range
1mVpp~5Vpp >20MHz
1mVpp~3Vpp ≤20MHz
Accuracy
±1% set value ±1mVpp(1kHz Sine,0 offset,>10mVpp)
Resolution
1mV or 3 bit
Flatness
±0.1dB,≤100kHz
±0.1dB,≤100kHz
(relative to 1K Sine, 1 Vpp)
±0.3dB,≤5MHz
±0.2dB,≤5MHz
±0.4dB,≤25MHz
±2dB,≤40MHz
Offset (50Ω)
Range
±5Vpk ,
ac + dc
±1.5Vpk ,
ac + dc
Accuracy
±(1% set value +5mV+0.5% amplitude)
Output impedance
50Ω
Protection
Short circuit protection, automatically disables the waveform output when overloading
SYNC Output
Level
TTL compatibility
Impedance
50Ω
Rise/fall time
<25ns;
Maximum frequency
25MHz
AM Modulation (CH1)
Carrier wave
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)
Source
Internal/external
Modulation wave
Sine, square, triangle and ramp
Modulation frequency
2mHz~20kHz
Modulation depth
0%~120%
FM Modulation (CH1)
Carrier wave
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)
Source
Internal/external
Modulation wave
Sine, square, triangle and ramp
Modulation frequency
2mHz~20kHz
Frequency offset
0~Maximum carrier frequency
FSK Modulation (CH1)
Carrier wave
Sine, square, ramp, pulse or arbitrary waveforms (excluding DC)
Source
Internal/external
Modulation wave
Square wave of 50% duty ratio
Keying frequency
2mHz~1MHz
Frequency Sweep (CH1)
Carrier wave
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)
Types
Linearity/Logarithm
Start/Stop Frequency
1uHz~Maximum carrier frequency
Sweep frequency time
1ms~500s
Trigger source
Manual operating, internal, external
Burst characteristics (CH1)
Carrier wave
Sine, square, ramp, pulse, noise and arbitrary waveforms (excluding DC)
Pulse count
1~65535 or infinite, gated
Start/stop phase
0~360°
Internal period
1us~500s
Gating source
External
Trigger source
Internal, external, manual operating
Frequency Meter
Frequency range
1Hz~160MHz
Frequency resolution
6 bit/s
Voltage range
and sensitivity
100mVpp~5Vpp
input impedance
1MΩ
Input adjustment
coupled modes
AC
Trigger Input
Level
TTL compatibility
Slope
Rise/Fall
Pulse width
>100ns
<500ns(burst)
Reaction time
<10us(sweep frequency)
Modulation Input
Impedance
1MΩ
Signal range
±5V ac + dc