Offset Printing Plate, Positive Offset PS Plate Plate type
Conventional positive plate.
Substrate
Electro-chemically grained and anodized lithographic aluminum.
Gauge
0.15/ 0.25/ 0.30 (mm)
Maximum width
1320 mm
Spectralsensitivity
350-420 nm
Safelight
UV filtered or Yellow
Sensitivity
130- 150mj/cm2
Color change
Blue Green to Green after exposed
Developer
Huaguang PD developer (concentrated solution), 1 liter can process 15 sqm. Recommended dilution ratio:1:3( machine process), 1:4( manual process)
Dot reproduction
2%-98% in 200 lines/inch
Packaging
0.15mm 100 pieces/box
0.25/0.30mm 50pieces/box if length<1030mm;
30pieces/box if length≥1030mm;
25pieces/box if the area>1m2
Shelf life
18 months when stored in a light-free area away from excessive cold, heat and high humidity
Run length
Above100, 000 (Actual run length may vary according to press, ink and stock conditions.)
Sizes can be produced by clients requested.
Good quality, stable performance. UsedbyKodak brand coating.
We also supply ctp plate, flexographic plate and graphic art film.
* Photosensitive materials should be opened in lightless or weak yellow light conditions. Must to avoid insolation and to avoid getting wet .Packaging & Shipping
1. If the gross weight of ps plate is lower than 50 kgs, you can choose it by Express Courier Service, like DHL, FEDEX, TNT, UPS etc.
2. If the gross weight of ps plate is about 52kgs-200kgs, you can choose it by Air.
3. If the gross weight of ps plate is more than 1000 kgs, you can choose it by Sea.
Precautions