LINKJOIN CIM-3110RMT Magnet Analyzerpermanent magnet dc motor step motor trade assurance supplier

linkJOIN CIM-3110RMT Magnet Analyzerpermanent magnet dc motor step motor trade assurance supplier
Brief Introduction
CIM-3110RMTMagnet Analyzer is a surface magnetic field measurement instrument for radially magnetized multi-pole permanent magnets. It can measure the peak value, angle, area, width and FWHM of every pole, and automatically judge the number of poles of the magnet ring and polarity of it; statistic analysis of test results and calculate the maximum, minimum, average and standard deviation of every parameter; it can draw the X-Y curve and polar coordinates curveProduct Overviews
Transmission Mechanism
The mechanism can adjust distance between the probe and sample by X, Y, Z stroke.
W axis adopts precision electric rotary platform, by the drive of stepper motor to control the rotary angle of sample, and the angular resolution is 0.01°.
Sample fixing construction
Adopt high precision 3-jaw self-centering chuck for precision positioning of samples when measuring circular samples. The concentricity is superior to 0.05mm.
The chuck has the nickel plating to avoid the corrosionwhich was caused by humid environment and oxidation.
The jaw is made of non-magnetic materials (pure copper), to avoid the effect of measured results which is caused by the magnetic conductive of fixture.
Range of sample size:
When measuring the outsidesurface magnetic field distribution: OD:Φ3mm~Φ90mm, Height≤75mm
When measuring the internal surface magnetic field distribution: ID: Φ10mm~Φ79mm,Height≤75mm(Related to the sample size)
We can design measuring fixture according to sample size and measuring requirements.
Magnetometer Range1KGs, 2KGs,4KGs,8KGsMin Resolution0.01GsAccuracySuperior to 0.5%
Hall ProbeAC 200~240V 50/60Hz 10A
Dimension
452mmx302mmx645mm(L * W * H)
Netweight
23.5kg
Total power
about 500W
System control
PC+6616PX 16bits data acquisition card
X Axes stroke
125mm,manual adjust
YAxes stroke
25mm, manual adjust
ZAxes stroke
200mm, manual adjust
W Rotation axis
Angle resolution 0.01degree, rotation concentricity≤0.05mm
Test time
It can be adjusted, the fast test time is 16 sec/cycle
Measurement range
When measuring the outside surface of cylinder workpiece:
outer diameter: Φ3mm~Φ90mm, height≤75mm
When measuring the internal surface of cylinder workpiece:
outer diameter: Φ10mm~Φ79mm, height≤75mmRange:1KGs, 2KGs, 4KGs, 8KGs
Accuracy:Superior to 0.5%
Minimum measured area:Transverse probe: 2.9mm*
*1.5mm
Measured parameters
Measure the real time surface magnetic field wave of multi-pole permanent magnets; maximum value, minimum value and average value of surface magnetic field; the peak value, angle, area, width, FWHM of every pole; spectral analysis of wave.
A/D Data acquisition
16Bits
Repeatability of test results
Less than 0.5%
Software
Windows7operating environment, the test results can be saved on hard disk by EXCEL, and can be checked at any time.
Measurement report
X-Y coordinate, polar coordinate and three-dimensional coordinate
Qualification judgment
With function of polarity distribution, polar area and calculation of peak value, and judge them according to standards.Standard configurationThe warranty period begins on the date of delivery of the product or later on the date of installation of the product if the product is installed by linkJOIN, the warranty period begins on the 31st day after delivery, provided that if you schedule or delay the linkJOIN installation for more than 30 days after delivery.

linkJOIN warrants the product only if it has been sold by an authorized linkJOIN employee, sales representative, dealer or linkJOIN headquarter.
The warranty period does not apply to defects of product result from improper or inadequate maintenance, repair or calibration;unauthorized modification or misuse; improper site preparation or maintenance. Caution: the hall probe is easy to damage; it's not in the warranty scope list.Exhibition ShowsFAQ
Q1:Whatarethetermsofpayments?
A1:WeacceptT/T,WesternUnion,Paypal,andcash.
Q2:Howlongitwilltaketodeliverythegoods?
A2:Ifwehavethegoodsinstock,wewilldeliverythemwithin3workingdaysafterwegetyourpayment.Ifwe
donothaveinstock,wewilldeliverythembeforethedeadlinewhichwebothpartiesagreedon.
Q3:Whatkindofpackageyouoffer?
A3:Wepackthegoodsbytheexportbox,fillwithfoamtomakesurethegoodsingoodconditionforstorage
andshipment.
Q4:Whatkindofshipmentwaysareavailable?
A4:Byseatoyournearestport.
Byairtoyournearestairport.
Byexpress(DHL,UPS,FedEx,TNT,EMS)toyourdoor.
Ifcustomershavetheirownexpressaccountnumber,transportationfeepaidbysuchaccountsarealso
welcome.WewillprovideyouatrackingNo.afterweshipthegoods,sothatyoucantrackthegoods
conveniently.