Introduction:
1. Low voltage supply
The voltage used to drive the thermal printer head is equal to the logic voltage, or is driven by a 5 V single power line, the range of operating voltage is 4.2V-8.5V, so four to six NI-Cd batteries or Ni-MH batteries can also be used. Two li-ion batteries can be used.
2. Compact and lightweight design
The mechanism is compact and light, dimensions: 67.7mm (width) * 24.9mm (depth) * 26mm (height)
3. Printing with high resolution
A high-density printer head of 8 dots/mm makes the good printing quality
4. High speed printing
According to driving power and sensitivity of thermal paper, set different printing speed required. Printing speed is 70 mm/ s (max.)
5. Easy paper loading
Detachable rubber roller structure makess the paper loading easier
6. Low noise
Thermal line dot printing is used to guarantee low noise printing.
Specification:
Print method
Thermal dot line printing
Dots per line
384 dots
Resolution
8 dots/mm
Print width
48 mm
Paper width
57.5±0.5mm
W * D * H(mm)
68*24.4*25.6
Maximum printing speed
70mm/s
Heater element pitch
0.125mm
Paper feed pitch
0.0625mm
Head temperature detection
Via thermistor
Out-of-paper detection
Via photo interrupter
Life span (at 25℃ and rated energy) Activation pulse resistance Abrasion resistance
100 million pulses or more (print ratio=12.5%) 50 km or more
Operating temperature range (℃)
0~50
Operating humidity (RH)
20%~85%
Storage temperature range (℃)
-25~+70
Storage humidity(RH)
5%~90%
Application:
lCash registers
lEFT POS terminals
lGas pumps
lPortable terminals
lMeasuring instruments and analyzers
lTaxi meters