Waterproof Grout Cement based for Joint Tile Powder JOTON CJ

Product Description
JOTON CJis a high technology Cement-based Powder, contains special additives. When it is mixed with water, it becomes viscid to stick Joints of bricks, tiles....in construction.
Grey powder, waterproof, high bonding strength.
Not peel off and blister.
Economic on executing time.
The coverage is twice more than cement mortar.Specifications Color:GreyWater/ powder ratio:0.25/1Coverage (thickness 2mm):0.7 – 1.5 kg/ m2Tensile adhesion strength:1.21 MPaCompressive strength:11.8 MPa
Tools:
Spatula or trowelApplication
Rate of mixture water/ powder = 0.25/1. the powder should be put into water gradually to avoid clotted.
After the powder absorbs water, it is stirred by a handle stir machine or stick until getting the flabby and identical mixture. Waiting for 7 or 10 minutes the stir again before using.
Surface of pasted tiles should be dampened prior to spread grout. High porous tiles may require wet addition in order to prevent excessive suction. Completely fill the joints with mixed grout and smooth it with a rubber squeegee or float. Waiting for about 30 minutes the use a damp small sponge to clean up the tile surface and smooth the joints.
It is very important to use minimum amount of water, as over working the joints can cause water float and/or shade variation. only when the grout in the joints become hard, the surface can be cleaned with a clean, dry clothe to remove all remaining traces of powderLaboratory
L.Q JOTON's laboratory conformed to ISO/IEC 17025:2005 , which is one of most prestigious chemical laboratories in VietnamPacking & Storage
5 kgs/box, 25kgs/ bagFactoriesTypical Projects
Please visit our Paints and Related Coatings website at http://joton.com.vn for more information.