Manual DMX 512 Wireless dmx 512 rgb rgbw led decoder

wireless dmx RGB and RGBW Led Controller pass CE RoHS
Wireless dmx Signal transmitting distance: 400 m
DC12-24V RGB/RGBW DMX Led Controller
Control 3ch and 4 ch, you can manually adjust the options,Master and slave mode function
R,G,B,D 4CH and R,G,B,W,D 5CH DMX driver with led display
Power supply: 5V-24V DC
Output: 4-loop,(R,G,B,W)
Power consumption: 1w
DMX-control-channels: R,G,B,D 4CH and R,G,B,W,S,D 6CH
DMX-512-connection: 3-pin
Master and slave mode function
Maximum ambient temperature ta: 40°
Maximum housing temperature tB (steady state): 60°
Connection: Total Positive
Output Voltage:5v,12V DC OR 24V DC
Output Current: Each circuit 4A, the largest 6A
Consumption 5V<60W 12V<216W,24V384W
4CH or 3CH can Switching via buttons on the controller Input Voltage12-24DCOutput Voltage12V/24V/DCOutput Max CurrentEachcircuit 4A largest 6ALoad output power12V Each Channels 48W 24V Each Channels 96WLoad output channels4CH (R G B W) 3CH(R G B)Control Waywireless DMX512 + built-program DMX-control-channels4CH (1R 2G 3B 4W),DIP switch settings addressSize(MM) 92*72*45MM
Product Image
Feature :
1. 3ch and 4 ch, you can manually adjust the options ;
2. The controller have master/slave(sub-mater) function ;
3. You can change programs via buttons, include dreamlike gradual
changing, jumping, flashing, dim ,brightness of single color, etc

4. Support DMX512 consoles,256 grade brightness, R,G, B color can realize about 16,770,000 color output ;Standard 3-pins male and female DMX signal connector, one input and one output ;Directly installed on the lamp
5. synchronization controlled no power adapter
6. with XLR connectors,easy to connected to console and other dmx device
Product Operation
dmx operation:
1.
A-R is red (0~255), 000 is off, 255 is brighest,
A-G is Green (0~255), 000 is off, 255 is brighest,
A-B is Blue (0~255), 000 is off, 255 is brighest
A-U is White (0~255), 000 is off, 255 is brightest
A-D is total dimming for all the leds, 000 RGBW is all off, 255 RGBW is all on brighest.
A-S is strobe effect.
A-1 is rainbow effect.
A-2 is color chasing effect.
2.
Both of them have master/slave(sub-mater) operation;
DMX-512 connection / connection between fixtures,
You could select one as "Master" such as "A-1" in below pictures:
So other wall washers " Adr" are slave, they could change colors following "Mater"
if we want only red color, so A-r "255",A-g and A-b "000".
"Adr" is slave, we only operate the Master A-1, and all others will follow it.
Application
Any questions or doubt ,please feel free to contact us .
Contact person: Ms. Jessy Wang
Email: Jessy(at)luxgreenled.com Phone (whatsapp): +86 13713520265 skype: jessywang11