HBM-T130 CNC 3 4 5 Axis Floor Boring and Milling Machine

Why Choose Us
This product is mainly for the processing of the box parts to achieve a five-sided processing of one­ time clamping. The nose of the spindle can be extended to the workpiece, and the square ram can also be telescopic to facilitate deep milling and deep groove. It can meet the processing of products with high coaxial concentricity. It is equipped with a rotary table with a weight of 0.001. It can realize five-axis linkage machining, stable casting structure, strong shock resistance, bending resistance of the column and high anti-torsion rigidity. The uppermost side of the stroke end can also be stably processed to achieve the best performance of the product.
HEAD
The shaft is made of imported German matenal SACM-645, and the hardness after treatment is as high as (HS 100° 土10° )．
TURNTABLE /ROTARY TABLE
With full-area support hydraulic pressure design, the unique twin-turbo without backlash drives six angles of any clamping force up to 13500kg/c㎡, and the cylinder is locked with a 90-degree pin positioning.
COLUMN
With full-area support hydraulic pressure design, unique twin­turbo without backlash drive at any angle, six fastening forces up to 13500kg/c㎡, cylinder locking with 90°pin positioning
FEATURES
Spindle motor 22 (continuous) / 26 (30 minutes) kw large output power.
The maximum torque output of the main shaft is 1800Nm (260kgf-m), which is the highest specification in the secondary distance.
The nose-type spindle head is close to the workpiece during machining and is suitable for heavy-duty cutting.
Rotary table can carry 8000-25000kg.
The Z-axis can withstand an axial load of 2000kg continuously, ensuring high torque and high rotational speed for extremely high cutting forces
The spindle bearings are lubricated with grease and are surrounded by a tubing-sheathed cooling design to avoic thermal displacement problems.
The flange of the spindle motor is cooled by tubing.
The main shaft is specially nitrided and has no wear for many years.
The X/Y shaft lead screw and the motor adopt a direct coupled transmission structure.
The advanced casting machine with good structural stability and strong earthquake resistance is composed of arch bridge type highrigidity structure.
The anti-bending and torsional rigidity of the column is increased by 1.7 times,and stable processing can be performed on the uppermost side of the Y-axis stroke end.
The combination of a spindle with nitriding and Ultra-low temperature (-190℃) and a high-precision and high rigidity spindle bearing can provide the best performance of the product for a long time





Travel
mm
mm
Work table
mm
Splindle
mm
kw
rpm
Accuracy
mm
0.01/1000
0.01/1000
0.01/1000
mm
±0.01
±0.01
±0.01
±0.01
Size
T
STANDARD CONFIGURATION
1, CNC control system standard function
2, Spindle constant temperature system
3, automatic power off device
4, hydraulic unit system
5, cutting fluid unit
6, automatic lubrication system
7, three-color warning light
8, working light
9, hand wheel control box
10, RS-232 interface
11, heat exchanger configuration
12, chip remover and chip bucket
13, Foundation bolts and level adjustment pads
14, controller operation manual and circuit diagram
15, Mechanical Safety Operation Manual
16, precision test table
17, splash protection and manual door
18, a set of mechanical adjustment tools
OPTIONAL
CNC system simens/Mutsubishi/Fanuc/KND
Each axis grating device Disc magazine /chain magazine
Spindle center water output 2-7MPa
12000-15000 mechanical spindle
Four-axis function Right-angle milling Head

Q1: Are you factory or Trade company？A1: We are factory. Our factory have more than 20 years experience in production various CNC machine.We provide final solution for machining manufacturing industry. Q2: How to choose the suitable machine？A2: Tell us your max workpiece size(such as max length,max width, max height and weight) and photo. We can recommend the suitable machine for you.Q3: Can you supply customized service?A3: We can customized according to customer’s special requirements.Q4: How to intall and operate of the machine?A4: Enough photoes, video and operation manual will be supplied.It will show how to operate the machine. Our engineers also provide online technical support Q5: What is the payment item?A5: 50% T/T in advance , 50% balance will be paid before machine leave the seller’s factory.Customer Photos
Certifications
Contact Us


LuoYang Yujie Industry&Trade Co.,Ltd