microcirculation microscope xw880

microcirculation microscope xw880
Nailfold Capillary Microscopy Color Microcirculation Microscope
Product Description
Technical parameters
1.magnification over 400 times
2. built-in camera380 000 pixels
3. light source LED
4.brightness of the light source over 600cd/m2
5. Stage X-Y double layer compound mechanical stage
6. Color LCD monitor 8.5inch (4:3)Color LCD monitor 7 inch (16:9)
7.AC input 100-240V50/60Hz DC output DC12V,2A
8. Package aluminum box (Size 40x29x36cm)
9. Gross weight 6.8kg
Testing conditions
1) Check the room temperature and humidity. Room temperature and humidity
should be kept relatively constant. room temperature should be maintained in the 22-24 degree , relative humidity about 70%
2) the patient generally take seats, keep the height of the hand the same with heart
3) Preparation of paraffin oil or cedar oil.Drop 2 drops in the nailfold skin. (Purpose prove light
transmission, and reduce skin scattering)
4)Testing generally be in the morning or afternoon, and review should at the same time every day .
5) the patient should
a.Avoiding intense activity or manual labor within one hour before testing
b. Take a rest about 15-30 minutes before testing
c.Can not take any drug which will affect the cardiovascular vessels before testing
d. Does not smoke , wash hands or eat within an hour before testing
e.Pay attention to the influence of the Female menstrual
How to find the clear first line of capillary in finger nail.

Step 1...Put the cedar oil on the verge of the finger and skin of the ring finger as bellow, put the verge of finger directly under the light source ( If there is no Cedar oil then please use baby oil or olive oil instead )

Step 2. Rotate the coarse handwheel to see the picture as bellow. The bigger one is the coarse adjustable wheel and the small wheel is the fine handwheel
Step 3. Just the X-Y wheel to get a correct position of the first line of the vessel(capillary tube) and then adjust the fine coarse handwheel to get a clear picture of the vessel. Usually we observe the first line of vessels which is large and obvious. So try to find the first line of vessels by rotating the X-Y wheel to change the position of the finger. And finally rotate the fine handwheel (the position in showed on step 2) to get a clear picture of the vessels


Step 4 If. there is spot on the screen, rotate the camera right and left to eliminate it.

Packaging & Shipping
Accessories of the microcirculation microscope
How to assemble the microcirculation microscope
Step 1: connect one side of the power with the plug
Step 2: connect other side of the power with the sub-second line
Step 3 connect one end of the sub-second line with the extend line
Step 4: connect the two end of sub-second line with the machine and the monitor
Step 5 : connect the video line to the machine and the monitor
Step 6: connect the power. Now the machine is ready for testing