Blue medical anti bedsore alternating pressure air mattress with 20 decibels silent run

Blue medical anti bedsore alternating pressure air mattress with 20 decibels silent run
Product Features

1 Cycle fluctuations
,the bedroom feels comfortable.
2 Fine building,
effect of innovation cycle fluctuation
3 Add Sleep Function,enjoy the night
4 Overcome all nursing challenges
5 It is comfortable and takes you away from the threat of bedsores
6 Soft bed surface: high polymer material, soft and comfortable
7 Cycle fluctuation: double airway circulation is filled and released to relieve body pressure
8 Sleep function: 20 decibels silent run, enjoy quiet sleep
Product style selection

1 Scroll mattress
(Standard version)
The basic anti-bedsore function, fluctuation, micropore air function, prevent the organization to be subjected to pressure for a long time and do not ventilate the result of sores
2 Scroll mattress(The massive and hole)
It has all the functions of the standard edition, and adds the block stools on the basis of the standard edition
3 Scroll mattress(The bar has holes)
On the standard version of the addition of the bar stools, long holes can be removed as a whole
4 Spherical undulating air mattress(Standard version)
Medical PVC+PU quality material, precision production, strong wear - resistant, bearing performance
Product matters needing attention

1 Mattresses can be bedspread in summer, towelling quilt and thin quilt in winter
2 no blanket
only spread the sheet during the treatment of bedsore
4. Place the mattress on a hard bed when using, and fix the mattress with four corners to prevent the airway from bending and deflating
5 when the programmed device is connected with the airway, it should be inserted directly, and the vent should not be twisted by force
Clean and disinfect regularly. Use a soft brush to dip in laundry detergent or soapy water. Dry naturally. Do not expose or bake. Disinfect with disinfectant spray.
7. When unpacking and washing a single strip, seal the air outlet of the airway with medical adhesive cloth, without affecting the continued use of the mat.
Matters needing attention

1. When you prepare to inflate the mattress, you should first fill the mattress with air before using it normally. Generally, the first aeration time is about 30 minutes.
2 when filling the air, check the pressure of the air pump to adjust the extension rubber tube of the maximum mattress.
Check whether all the air pipe connectors under the mattress are connected properly and keep the air filling normal
Since the winter is cold, we can put a thin mattress on the top of the mattress to keep the patient warm and warm so that the patient is more comfortable.
Patients who exceed 135KG cannot use this mattress.
6. Please pay attention to pressure control when filling the air bag, and do not exceed the maximum pressure to prevent the air bag from bursting.
Pay attention to keep the mattress clean and sanitary. Always clean the surface with neutral detergent, and pay attention to anti-acid and anti-alkali.
Note that the mattress and sheet surfaces should be free of sharp objects to prevent puncture.
9. Keep it clean when using, put it in a dry and ventilated place, and keep it moisture-proof.
Product pictures
Our Service
Service content
Medcare is a specialized medical equipment exporter. based on customers' early enquiry, we can provide the best products solution and help them reach a balance between purchasing cost and time. In addition to our own brand products, we also accept OEM orders.
1. Product amount purchased
To balance the cost of both sides, Medcare set MOQ for the products.
2. Product Packaging
The detailed packaging of each product is different. Generally, our products are packed in 5-layer brown cartons. Then, according to customers' needs, we decide to use wooden box or not. We offer a vast diversity of products. You can purchase more than one kind of products and we can package them together to save your cost.
3. Delivery Cycle
Normally, the delivery cycle is within 7-30 days. For OEM orders, it will be different. We own design department and engineers which can offer CAD drawings within 2 days to maximally meet customer's requirements. We will take full advantage of our resources to make samples during 10-15 days and deliver them to customers for /confirm/iation. After /confirm/iation, we will deliver finished products within 15-30 days. For specific circumstances, the delivery cycle depends on order quantity.
4. OEM
In our product range, we accept OEM orders from any customer and in any quantity. OEM covers customer LOGO, operation manual, special packaging, etc. For some customers who need samples and put forward some changes on design based on samples, Medcare can meet their requirements.
5. Samples
We always do our utmost to win long term and stable medical products wholesalers, distributors and final users using high quality, cost effective samples and exceptional services. We can offer free samples (less than 50 USD) to the customers who are intended to cooperate. Delivery costs can be discussed.
After-Sales Service
If the products that you have bought from Medcare have quality problems, you can contact us anytime by Phone, Email, Skype, WhatsApp, etc. We offer 24-hour telephone service and response email within 5 minutes. Email response time will not exceed 5 hours due to time difference. We guarantee change of products and refund if there are quality problems, and we will undertake delivery costs.