Thermoelectric peltier module tec1-12706 thermoelectric cooler peltier 12v 60w

Thermoelectric peltier module tec1-12706 thermoelectric cooler peltier 12v 60w
Features:
1. Fast cooling.
2.The cooler works without noise, vibration and wear. It has a long lifetime and high reliability.
3.It is small and light.
4.It can control temperature with high accuracy and work as soon as the power is on. No waste is produced to pollute the environment.
5.The heating is permitted under suitable condition.
Fields of application:
1.In high-tech fields.
Satellite, semiconductor laser,photoelectric device, infrared detector, etc.
2.Family electical equipment
Electronic moistureproof box, cooling and heating box, drink refrigerator, cooler, etc.
3.In electronic technology
4.In some industries
5.In medical instruments, agriculture and biology
Specifications: TEC1-12706The following picture12720AWG UL1569 105℃ Standard tinning wire,PVC insulation skin,Lead length350±5mm,End department bare 7±1mm,Lead welds in heat surface one end1.95~2.20Ω(Environmental temperature 23±1℃,1kHZ Ac)65~68℃12VDC 4.7A,15.4VDC 6.3A15.4VDC56W(15.4VDC)98N/cm2-55℃~80℃704 silicon rubbersHot surfaceFoam box,10 Box / carton,50 pieces / boxEnvironmental temperature-10℃~40℃,Relative humidity≤80%,Ventilate and no corrosivity gas ContactFAQ
1. Q: How long is theuseful life of this component
A: nomal useful life is 100,000 hours, according to personal usage
2. Q: what will shorten the lifespan of module?
A: 1.alternate use hot and cold frequently. 2.in vibration circumstance. 3.radiator temperature over 65 degrees. 4.over the vlotage. 5. the hot suface of module connection is not bad.
3. Q: How to prolong the lifespan?
A: To prolong the lifesapn, should seal aroud the component to completely isolated with outside air. you can use 704 silicone or epoxy resin
4. Q: how do you check with a multimeter tester or other means to find out if the module is normal or not?
A:check with a multimeter tester is not very correct,only can be reference. you can test with data bridage or balanced resistance meter to test the resistance of module.