MIC Detal Laboratory dental Class B Beauty Medical Tattoo autoclave salon autoclave

MIC Detal & Laboratory dental Class B Beauty/Medical/Tattoo autoclave/salon autoclave
1. This sterilizer is a sophisticated equipment but of very friendly use, adaptable to the different demands thanks to the wide possibilities of configuration and choice of the cycles.
2. The equipment is able to treat in fast way every type of load, in particular handpieces, turbines and hollow articles, through various patented systems and the operation completelymicroprocessor controlled.
3. It is characterized by an advanced fractionated vacuum system forthe complete air removal also from hollow and porous materials as well as by an effective final vacuum drying phase able to eliminate any trace of condensation from the load
Ø LED or LCD display panelØ Adopt Motorola sensor for intelligent and precise control as well as fault auto-detection techniqueØ Precise temperature control (±0.5℃) during sterilization processØ Built-in program to clean the pipelines automatically and avoid the blockageØ The LCD can display the sterilization data and relevant curve clearlyØ Built-in water quality, water shortage and water overrun monitoring featuresØ Safety value, double lock, mechanical lock, air lock and multi-level protection to ensure the pressure is safeØ Optional for printer, built-in USB module to output the sterilization data via USB Flash.Ø Widely applied in stomatology, orthopedics, ophthalmology and beauty etc. industries.
Product Description
MIC Autoclave (Steam Sterilizer) Technical Specifications
Equipment
Steam sterilizer
Classification
Class B
Model
S-16BC, S-18BC, S-23BC / S-16BE,S-18BE,S-23BE
Power supply
220V±10%
Frequency
50Hz±1 Hz
Mains fuses
F 15A 240V
Rated power
16L 1600W
18L 1700W
23L 1900W
Device dimensions
625 x 425 x 456 mm
Package dimensions
755 x 584 x 532 mm
Insulation class
Class II
Certificates
CE, SFDA, ISO9001, ISO13845
Utilization
Internal use
Acoustic noise level
50 db(A) max
Operating conditions
Temperature: 5℃~40℃
Relative Humidity: max 80%, non-condensing
Height: max 3000 m (a.s.l.)
Weight
16L approx. 41 kg
18L approx. 46 kg
23L approx. 54 kg
Sterilization chamber dimensions
16L 230 x 360 mm
18L 250 x 380 mm
23L 250 x 450 mm
Distilled water container capacity
approx. 5.0 L
Sterilization programmers
6 programs available
4 presets available
Test programmers
Helix/BD Test; Vacuum Test
Pre-heating time
approx. 20 min
1 - LCD display 5 - Distiller water outlet 2 - Command panel 6 - Used water reservoir outlet 3 - Power switch 7 - Sterilizer Chamber 4 - USB interface for USB Flash8 - Sefety Door


9 - Main fuses 10 - Power socket11 - Serial port for printer12 - Printed Label 13 - Water outlet
MIC Autoclave (Steam Sterilizer) Available Programs General B Cycle18mins B CycleUnwrapped cycleRubber & plastic cycleB&D VacuumCleaning steam generatorTesting cycletesting cycleSterilization134134134121134----Temperature(℃)Sterilization pressure(bar)2.12.12.11.12.1----Sterilization classBBSBB----Pre-heating0-70-70-70-70-7----(min.)Vacuuming time(min.)101041010420Air inlet time(min.)55555----Sterilization time(min.)4184163.510--Drying time(min.)262626261--26Fast drying time(min.)5555------Total time(min.)31-3645-5025-3043-4819.51531
1.Pre-heating of the steam generator and sterilization chamber;
2.Chamber air removal and steam penetration inside the load through a series of vacuum (fluidexhaustion from the sterilization chamber) and pressure phases (steam entering into the chamber);
3.Pressure increasing, with consequent steam temperature increasing up to the preset sterilization conditions (for the example, 134°C);
4.Stabilization of the pressure and temperature conditions inside the sterilization chamber;
5.Run of the sterilization process for the preset time (for the example, 4 minutes);
6.Chamber pressure decreasing through steam discharge;
7.Vacuum drying phase;
8.Chamber pressure leveling up to atmospheric value.
MIC Autoclave (Steam Sterilizer) important components
MIC Autoclave (Steam Sterilizer) important features
MIC Autoclave (Steam Sterilizer) Applications
1. Stomatology
2. Beauty
3. Orthopedics
4. Ophthalmology
Attentions:
The process sterilization can consider effective, reliable and repeatable on condition that the material is first suitably treated andsubsequently tidy and correctly arranged into the sterilization chamber..
An incorrect arrangement of the load can lead to a difficult and sometimes impossible flowing and/orpenetration of the steam on the material,with imaginable consequences. The drying process can strongly be also affected by this factor.
Therefore we suggest some basic directions concerning this aspects, leaving the user to deepen the problem in the most opportune way.
Company Information
Service Details
-Lead time: 3~6 days after payement is /confirm/ied;
-QC: Each product will be 100% checked before shipment;
-OEM & ODM service are welcome for further discussion;
-2 Years warranty for the whole device.
about Us
Founded in 2011, MIC Medical has transformed from a humble star-up to one of the most dynamic respiratory medical & healthcare devices manufacturers in China. Our major products are oxygen concentrator, compressor nebulizer, sterilizer ect. We are strictly operating under ISO9001:2008 and ISO13485:2003. Furthermore, we obtain CE and SFDA (equivalent to FDA in USA) approvals and independent patents for our products.
Our supply chain is very global. We work with suppliers from Swiss, America, Japan, UK, Taiwan ect to deliver the finest products on the market. We care about every tiny detail. All electronic components are UL/CE certified and the whole product is complied with EU MDD93/42 ECC directive to eliminate any safety risks.
For the past few years, we not only established a robust national sales network that covers every province in China, but also extended our business to overseas markets. We are working with many major renowned brands on OEM/ODM basis as well as promoting MIC brand on the market.
Welcome to join us and become our distributors!