MPPT1260 MPPT Solar Charge Controller 60A 40A 12V 24V for Solar Power System

12V MPPT Solar 60a solar charge controller Rated Voltage12/24Vdc24Vdc48VdcRated charge current
(Include load current)40Amp or 60Amp40Amp40AmpLoad current15AmpInput voltage range15-45/30-70Vdc30-100Vdc60-100VdcMax. PV open circuit array voltage45/70Vdc100Vdc100VdcOverload protection (DC load)2.0 * Inom>5s
1.5 * Inom>20s
1.25 * Inom temperature controlledTypical idle consumptionAt idle<10mACharge specification12Vdc model24Vdc model48Vdc modelBulk charge (Default)14.6Vdc(default)29.2Vdc(default)29.2Vdc(default)Floating charge (Default)13.4Vdc(default)26.8Vdc(default)53.6Vdc(default)Equalization charge (Default)14.0Vdc(default)28.0Vdc(default)56.0Vdc(default)Over charge disconnection14.8Vdc29.6Vdc59.2VdcOver charge recovery13.6Vdc27.2Vdc54.4VdcOver discharge disconnection10.8Vdc (default)21.6Vdc (default)43.2Vdc (default)Over discharge reconnection12.3Vdc24.6Vdc49.2VdcTemperature compensation-13.2mV/℃-26.4mV/℃-52.8mV/℃Lead acid battery settingsAdjustableNiCad battery settingsAdjustableLoad control mode1. Low Voltage Reconnect (LVR): Adjustable
2. Low Voltage Disconnect (LVD): Automatic disconnection
3. Reconnection:
Includes warning flash before disconnect & reconnectionLow voltage reconnect12.0-14.0Vdc24.0-28.0Vdc48.0-56.0VdcLow voltage disconnect10.5-12.5Vdc21.0-25.0Vdc42.0-50.0VdcAmbient temperature0-40℃ (Full load) 40-60℃(De-Rating)AltitudeOperating 5000 m, Non-Operating 16000 mProtection classIP21Battery temperature sensorBTS - Optional
Remote battery temperature sensor for increased charging precisionTerminal size (fine/single wire)#8AWGDimensionDepth:≤192mm
Height:≤66mm
Width:≤140mmUnit Weight1.4 KgWarranty2 YearsMountingVertical Wall Mount-Indoor OnlyCoolingNatural Cooling
1. Product Description
Through the use of MPPT technology, Solar mate can increase charge current up to 30% or more compared to conventional controllers. Solar mate's sophisticated three stage charge control system can be configured to optimize charge parameters to precise battery requirements. The unit is fully protected against voltage transients, over temperature, over current, reverse battery and reverse PV connections. An automatic current limit feature allows use of the full 40 amp capability without worrying about overload or nuisance fuse blow from excessive current, voltage or amp-hour based load control.
Fully automatic temperature compensation of charge voltage is available to further improve charge control and battery performance. The optional battery temperature sensor is built for long term reliability. The sensor element is environmentally sealed and encapsulated into a plastic lug which adheres to directly to the battery terminal and by R.J11 port connect with the unit, And the Solar mate also includes an isolated RS232 port for connection to a PC computer for data logging and system monitoring . The Solar controllercan easily install in parallel connection, so it also suitable for large system current application condition.
2. Product Features
(1) High converting efficiency higher than 97%
(2) Built-in MPPT tracker is equipped in the power inverter to optimize the power transformation
(3) Reversed current protection for preventing equipment damage
(4) Automatic battery temperature compensation for long-term reliability
(5) The solar charge controller is suitable for various types of batteries for the different charging modes
(6) Capable of connecting additional DC load for wider applications
(7) Three stage charge control system (bulk, absorption, and float mode) with temperature compensation
(8) LED indicators display charge status in real time
(9) Pulse Width Modulation (PWM) topology combined with a multi-stage charge control algorithm leads to superior charging and enhanced battery performance
(10)The temperature of the controller's transistors is continuously monitored. This protects the charge controller from damage in high temperature environments.
3. Easily install in parallel connection
Solar System & Wind System
Dual Power Transfer Controller:
12V/24V/48V 110V/220V
Wind Generator:
S700 S800 S1000 M300 C400
EW200 EW300 EW400 EW600 EW1000
Solar Panel:
Mono Poly
Solar Controller:
PWM MPPT SMART-MPPT
Power Inverter:
Pure sine wave Modified sine wave
W-series
Solar connector:
Cable-MC4 Panel-MC4 T-branch-MC4
Cable-MC3 Panel-MC3 T-branch-MC3
Solar Cable:
2.5mm2 4mm2 6mm2
Solar Tool:
3. Terms Of Payment
Payment Terms: We accept any payment, Such as T/T, L/C, PayPal, Western Union, D/P, D/A, O/A, MasterCard, Cash, etc
We are a professional manufacturer of Solar Charge Controller for many years. Our company has formeda perfect full-service system integrated by the R&D, manufacture and domestic trading and foreign sales. based on the trading belief 'Focus on customers,' our company has been calmly handled the market oscillations. For our trading process, we are not just selling our digital meter but also focusing on customers'satisfaction.
1. 24-hour online service
Please feel free to contact us. Our sales team will provide you with 24 hours better pre-sale,
2. Competitive price
All of our products are supplied directly from factory. So the price is very competitive.
3. Warranty
All products have a three-year warranty.
4. OEM/ODM
With 15-year experiences in this field, we can provide customers with professional suggestion
To promote common development.
5. Distributor
The company now recruit distributor and agent all over the world. prompt delivery and professional after-sales service are our priority, which makes us to be your reliable partner.