HOT SALE building glass mosaic tile for home decoration
Item No.:SFH108A
Product Show:
Product Information
crystal mosaic/crystal glass mosaic/crystal glass mosaic tile Name
HOT SALE building glass mosaic tile for home decorationItem No.
SFH108A Size
Chip Size: 23*23*8mm
23*48*8mm
48*48*8mm
Sheet Size:300*300*8mmSheet Cover
0.09 Square Meters
Thickness
8mmMaterial
GlassBacked
Mesh-mountedAvailable
Wall and FloorMOQ
63Square MetersPrice
FOB FoshanPackage Details
11sheets to a carton (carton: 314*314mm)
72cartons to a pallet (pallet: 1.05m*1.05m)
20pallets to a 20ft container
1 square meter in acarton
Inner packing: plastic sheet, carton
outer packing: seaworthy wooden cratepayment Term T/T; L/C at sight; Delivery Time 25 daysafter receive 30% deposit by T/TSupply Ability
20000squared meters per monthCertificate
Inspection Report, Certificate of Design PatentService
OEM, Certificate of Design Patent
crystal mosaic/crystal glass mosaic/crystal glass mosaic tile
Suitable place:
A. hotel crystal mosaic/crystal glass mosaic/crystal glass mosaic
B. office building(wall, restroom)
C. houses(ketchen,living room,rest room)
D. Sarloon(tops,desk,chair,etc)
INSTALL INTRODUCTION:
1. Adopt professional binder and joint filler,and parts of our products adopt neutral adhesives.(see interipr instruction) crystal mosaic/crystal glass mosaic/crystal glass mosaic
2. Use professional grey knife to scraping 2-3mm thick paste binder after cleaning the surface. crystal mosaic/crystal glass mosaic/crystal glass mosaic
3. Use dentations trowel carve to score out waviness on the flat mushy adhesive.
4. Paving mosaic,pay attention to the seam between the products themselves remain the same width slit. crystal mosaic/crystal glass mosaic/crystal glass mosaic
5. Tenderly pat the surface of the mosaic and leveling them to make sure it is adhesive evenly. crystal mosaic/crystal glass mosaic/crystal glass mosaic
6. about 20 hours latter, setting binder full between mosaic with sponge sealant expected to fill the gap. crystal mosaic/crystal glass mosaic/crystal glass mosaic
7. After about 30 minutes, the joint the filler will be semi-dry, use wet high density sponge to fill into joint about 1-2mm,which can better show the highlight effect of the product.
8. Finally used dry clean towel to complete the construction.