Dental Product Treatment Chair

Dental Product Treatment Chair
Using Conditions
In order to make sure the normal use of the machine, the input water, air, power supply and its work conditions shall meet the following parameters:
1. Air supply: air pressure 0.6MPa-0.80MPa, flux>50L/min, no oil;
2. Water supply: water pressure 0.20MPa-0.40MPa, flux>10L/min, rigidity<25 degree.
3. Power supply: a.c. 220V~230V,50HZ/60Hz, 10A
4. Environment: temperature 5-40℃, relative moisture 30%-75%.
Specification
n No load rotating speed of the high-speed turbine handpiece (air pressure 0.22MPa)≥35x104r/min
n No load rotating speed of the low-speed motor handpiece (air pressure 0.30MPa)≥18x103r/min
n Illumination for operating light: 8000Ix~15000Ix
n Illumination of the film viewer: ≥2000Ix
n Load capacity of the dental patient chair: ≥1323N (135Kg)
n Load weight of the insturment tray: ≤5Kg
n The highest position of the patient chair from the groud: ≥700mm
n The lowest position of the patient chair from the groud: ≤500mm
n Backrest movement range: 105°- 170°
n Head rack exetension range: 120mm
n The biggest backward angle of the seat cushion: ≥12°
n Temperature of the constant temperature water heater: (40±5)℃
n Work space: length≥4000mm/width≥2600mm/height≥2000mm
n Sketch map of the external junction box
Parameter
1.Back cover
2.Protective cover
3. Cushion
4. Backrest
5. Headrest
6. Assistant control buttons
7.saliva ejector
8.high power suction10.Spitton
11.cabinet
12.Lamp arm
13. Operating light
14.Forth-rotating joint
15.Joint plastic cover
16.Bank-rotating arm
17.Film viewer
18.Instrument tray
19.Main control buttons
20.Air pressure controlled handle24.Round table
25.Junction box
26.Step
27.Calf cushion
28.Armres
29.Bottom cover
1. Upward balancingcover
31.Dowenward balancing c
32.Holder
33.Wheels
Below 2 types for your choosing:
ND-398Sanor'e(handing arm) &ND-398Sanor'e (cart type)
Welcome Your Contact For More Information !