Fingerprint Reader Keypad And Rfid Card Reader Fingerprint Reader

1. Products Introductions
CHD200G series Fingerprint Reader is the second generation Fingerprint Reader of our company, integrates with strong 32bit RISC CPU and the advanced identify algorithm, also have Voice Remind functions. It provides the fast 1:1 or 1:N comparison, well-adapted standalone fingerprint identify products. With strong anti-interferences, and anti-stress, tamper functions, make the product more useful and safety. It extends the password keypad, ID/IC card reader and voice remind functions, and the product have identification+authorization confirmation functions, supports Wiegand 26 output and RS 485. Usually used in Smart Buildings, Bank Vaults, Control Centers, and Jails etc. with strict security requirement areas. Weight: 0.2Kg±5%;
Working Voltage: 12VDC±5%;
Working Current: 300mA±5%;
Car Type: ID or IC card;
Frequency: ID card: 125KHZ±5%, IC card: 13.56MHZ±5%;
Reading distance: 50-100mm (without other same products interferences);
Working environment: -10~+55C degree, 20%~90%;
Working environment: -20~+70℃, 5%~90%;
ESD parameter: air discharge ±8KV
Working status: standby status, LED blue light ON; scan the fingerprint, green LED light ON; illegal fingerprint, buzzer three beeps, red LED and blue LED blink twice; legal fingerprint, buzzer beep once, red LED and blue LED blinks twice; legal fingerprint, buzzer beep once, red LED light and blue LED light blink once; swipe card, buzzer beep once, red LED light and blue light blink once.
Standard: Fingerprint Enterprise Standard, Enterprise Standard No.: Q/NBL007-2006.
Others:
Keypad: 12 keys;
Communication: RS485, use for fingerprint download or upload;
Communication speed: 9600/19200/38400/115200 BPS, 38400BPS as default;
Net ID: 1-254 set by software, default as 1, using 0 to do any operation;
Output Interface: Wiegand, OC output;
Output format: 26bits /28bits /44 bits optional;
Communication distance: Wiegand less than 60m, RS485 less than 1200m;
Sensitivity Grade: FRR 1.4%, FAR 0.00001%;
User Capacity: maximum 5000 users;
Fingerprint Capacity: 5000;
Fingerprint working mode: 1: N identification: support fingerprint, card, keypad
1:1 identification: support keypad ID + fingerprint, card + fingerprint
Password function: fingerprint + password, card + password, ID + password
Fingerprint identify time: ID + fingerprint / card + fingerprint, less than 1s
Fingerprint only work mode: save 5000 fingerprints, identify time less than 3s;
Fingerprint scan valid area: 16mmX14mm±5%3. Functions and Operation3.1 Functions3.1.1 Working Mode
Support to use software to set Device working mode, output Wiegand format, In & Out direction, Wiegand output code method.3.1.2 Keypad functions
When the case of no associate keypad mode, keypad output support 4/8 Wiegand mode3.1.3 ID/IC card reading Fucntions
Without associated fingerprint situations, support Wiegand 26/44 format output.3.1.4 Fingerprint identify mode
Support fingerprint only, ID + fingerprint, card + fingerprint identification modes.3.1.5 Stress fingerprint alarm functions
once user input stress fingerprint, output alarm information through Wiegand 28/29 mode.3.1.6 Fingerprint output
Fingerprint ID output format support BCD code and Hexadecimal output3.1.7 Fingerprint register
Using software to register, maximum fingerprint eigenvalue as 1664 bytes. Through RS485, maximum user 6000 users.3.2 Operation3.2.1 Fingerprint scan method
To take HD fingerprint image, , finger should be close to touch fingerprint sensor and refer to below picture and use correct method to scan the fingerprint:

Remark: Pic a and Pic b as the right way, Pic a as face, Pic b as side. Pic c, Pic d and Pic e as wrong way.
Put the finger and wait more than 0.5s! One user can have three fingerprints, here advice one user register 1 or 2 fingerprints.3.2.2 Simply operation method
Connect the device by RS485 with the computer, use software to manage, and do the following operations:3.2.2.1 Register User
Using software to register user information, include User ID, Fingerprint Index No. (No. in the registered fingerprint database), Card No., backup password;3.2.2.2 Register fingerprint
Using software to register, maximum fingerprint eigenvalue as 1664 bytes.3.2.2.3 Register fingerprint
Using software to register the registered fingerprint, if not register in the device first.3.2.2.4 Standalone mode
Input fingerprint, swipe card or press keypad, then output the set Wiegand format date. 3.2.2.5 Swipe card with fingerprint
Swipe card first, scan the fingerprint in the 10s of the associated fingerprint, if input succeed, will output the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29 only. Press button to output the keypad signal.3.2.2.6 ID with fingerprint
Input User and press # as the end, input the fingerprint in 10s, if succeed, will output the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29 only. Swipe card to output the associated Card No.3.2.2.7 ID with password
Input User and press # as the end, input the user password in 10s, if succeed, will output the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29 only. Swipe card to output the associated Card No. 3.2.2.8 Swipe card with password
Input User and press # as the end, input the user password in 10s, if succeed, will output the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29 only. Input fingerprint to output the associated User ID3.2.2.9 Fingerprint with password
Input Fingerprint, input the user password and press # as the end in 10s, if succeed, will output the User ID by the set Wiegand input format. If the device is as Out direction, output Wiegand 29 only. Swipe card to output the associated Card No. 3.2.2.10 Change Device ID
Using ID as 0 to connect the device with the software, then use the software to change the ID, available range is from 1 to 254.
....