Main technical parameters1. The belt roller Diamters 50 mm, wall thickness more than 1.5 mm
2. Take 6000mm, 8000mm, 12000mm and 16000mm as the standard length of belt conveyor, and the belt surface width is 800mm, 1000mm, 1200mm and 1500mm. As far as possible, standard length is used for connection in the design.
3. Belt conveyor speed: linear speed of common parts and small parts: 25-45m/min;Transmission equipment is equipped with frequency converter.The technical requirements1. Standardized structure of the whole conveyor, modular design is adopted, and standard modules are established for the head, tail, driving device, fuselage standard section and support.
2. The main mechanical parts of the equipment are standardized and accurately positioned. All the same parts should have good interchangeability.
3. The conveyor has a beautiful appearance and smooth surface.
4. The conveyor shall be designed according to the specific position and function, and selectively press forward or reverse.
5. During the design of conveyor bracket, it should be easy to clean up the hygiene of this part.
6. The conveyor body, supports and guardrails shall be sprayed with plastic on the surface.
7. The driving drum, steering drum, tensioning drum, transition drum and roller require flexible rotation and convenient replacement.
8. The conveyor bracket is stable and reliable, and the connection is firm.
9. The belt is wear-resistant, non-toxic and pollution-free.
10. The conveyor adopts effective noise reduction measures to ensure that the equipment noise of all personnel operating stations does not exceed 72dB at a distance of 1.5m from the noise source.