Pon Gpon Ftth 1ge Dual Mode Onu Xpon Ftth Ont

Xpon Dual mode 1GE ONU
1.Application
2.Product Description
G/EPON 1GE Safe ONU is support Dual mode(EPON and GPON),It can also be applied to a wide temperature environment, and also has a powerful firewall function.
G/EPON 1GE onUmeetstelecom operatorsFTTO (office), FTTD (Desk), FTTH(Home)broadband speed, SOHObroadbandaccess, videosurveillance and otherrequirements and designaGPON/EPONGigabitEthernet products.The box is based on the mature Gigabit GPON/EPON technology, highly reliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
3. Product categories
Product model
Product specification
Chipset
SDRAM Memory
PTT2201
1 G/EPON+1GE
ZTE
32MB
4.Technical parameters
Technical item
1GE
PON interface
1 G/EPON port(EPON PX20+ and GPON Class B+)
Wavelength:Tx1310nm,Rx 1490nm
SC/UPC connector
Receiving sensitivity:≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
LAN interface
1 x 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M Full/Half, RJ45 connector
LED
3, For Status of REG,SYS,link/ACT
Operating condition
Temperature: -30℃~+70℃
Humidity: 10%~90%(non-condensing)
Storing
condition
Temperature : -30℃~+70℃
Humidity :10%~90%(non-condensing)
Power supply
DC 12V/0.5A(option)
Power consumption
≤4W
Dimension
82mmx82mmx25mm(LxWxH)
Net weight
85g
5.Panel lights
LED
Mark
Color
Status
Description
system
SYS
Green
On
Device is powered on and starting.
Blink
Device is running normally.
Off
Device is powered off.
Opticalsignal state
REG
Yellow
Blink
Device is notregistered to thePON system.
Green
Blink
Device is being registered.
Green
On
Device is registeredto thePON system.
Interface
link/ACT
Green
On
Port is connectedproperly .
Off
Portconnection exceptionor not connected.
Blink
Port issending or/and receiving data.
6Interface description
Port Type
Function
PON
Connect PON port with internet by SC/UPC type, single mode optical fiber cable.
LAN
Connect device with ethernet port by RJ-45 cat5 cable.
RST
Press down reset button and keep1-5seconds to make the device restart and recover from the factory default settings.
DC12V
Connect with power adapter.