Product Description
1.OverviewThis machine is mainly used for the automatic formation of flat masks: the whole roll of fabric is unrolled and driven by rollers, and the fabric is automatically folded and wrapped.The entire roll of the nose bridge is rolled out and cut to a certain length, and then imported into the covered fabric. Its two edges are sealed by ultrasonic welding, and then sealed by ultrasonic side sealing, and cut by a cutter. The mask is conveyed to the two mask earband welding stations through an assembly line, and the final mask is formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line for collection.
2.The equipment is shown in the figure (this picture is for reference only, the equipment is subject to the actual product)
3.Equipment installation and configuration requirements
(1) Equipment size: L6500mm * W7800mm * H1800mm
(2) Equipment weight: 2000kg
(3) Working power: equipment 220VAC, 50HZ, rated power is 13KW
(4) Compressed air: 0.5-0.7MPa
Operating environment: 10-35 degrees, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanliness no less than 100,000)
4.Applicable material specifications
item
number of
hanging shaftswidth (mm)coil length (mm)
barrel inner
diameter (mm)weightCloth3170-200Φ600φ76.2Max 15kgnose clip strip13-7Φ400φ76.2Max 25kgear loop43---5.Production size 175 * 95mm
Technical parameter
6.1 Equipment production capacity
(1) Capacity: 100 pcs / min
(2) Equipment qualified rate is 98%
(3) Equipment failure rate: 2%
7.Configuration list of main components
NO.projectBrand1cylinderAIRTAC2The electromagnetic valveAIRTAC3servo motorHechuan / Huichuan4PLCXinjie, Huichuan5BearingHarbin Bearing6Line railShangyin7Electric eyeMatsushita8touch screenVinlon9RelayOmron10ButtonSchneider
Detailed Images
FAQ