Gypsum board corner tape

Drywalljointmetalcornertape
Material:galvanizedsteelorAluminum
Size:50mmx30m
Withtworeinforcingstrips
PlasterboardmetalCornerTape
Cornertapesaredesignedforuseoninternalandexternalangles,thetapesareappliedusingstandardjointcompoundandareperforatedtoprovidestrongerjoints.
Ourdrywallproductshavealwaysledthewayinprovidinginnovativesolutionstocontractorsandinstallers.
Thetapeissuitableforanydegreeofangleithelpsstraightenframingirregularities,resist’sdentsandcracking,iseasytocutandcanbenotchedforuseoncurvedjointssuchasarchwaysandportholes.CornerTapeComposition:
oMaterialbody:kraftpaper,zincplatedsteeloraluminiumcoatedstrips.
oRolllength:30m
oPaperwidth:51mmZinccoatedsteel/aluminumstrips:
oSpacebetweenstrips:2mm
oStripswidth:11mrn
opaperweight:145g/sqm
ometalthickness:0.25mm+-0.02mm
oPaperflexuralstrength:4400N/mm
High quality paper with two metal strip reinforce,apply good protect wall corner.
* Very high tensile strength.
* Steel with zincification or aluminium,rustiness resistant.
* Roll pack,easy to cut as requirement.
* Machine use available.
Application:
Flexible metal Corner Tape is ideal for use in a variety of drywall applications: internal or external corners which are 90 degrees or not 90 degrees, for manual application only.

Our advantages:
1)professionalmatureproductionline
2)largeproductioncapacity.
3)Strictqualitytesting
4)factorypriceandbestquality
5)fastdelivery

6)highefficientafter-salesservice
7)emergencystockpile
8)wepromiseallofthequeriesandemailswillgetourreplywithin24hours.
How to use:
1. Cut flexible metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8", covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.
2. once the corner is embedded, remove excess compound with taping knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6"- 10" wide on each side of corner. When dry, sand lightly if needed. The wide, galvanized steel strips act as a guide to ensure straight, reinforced angles for both "inside" and "outside" corner needs.Contact way
Website: www.fibermesh.net
Contact: Kasey Huan
Phone: +8617854286953 Fax: +86-532-66025873
Address: Rm102,Unit1,17th Building,No.22,Jin songRoad, Qingdao, China
EM: sh(at)jnf.net.cn
Skype: junfengindustry18