Opgw Fitting Dead End Grip Adss Fitting Dead End Grip Acsr Dead End Grip

A tension clamp (strain clamp, dead-end clamp) is a fitting used to fix a wire to withstand the tension of the wire and to hang the wire to the string-resistant string or tower. The tension clamps can be roughly divided into two categories according to the structure and installation conditions. The first type: the tension clamp is to withstand the full tension of the wire or the lightning protection wire. The clamping force of the clamp is not less than 90 of the rated tensile strength of the installed wire or lightning conductor, but not as a conductor. This type of clamp can be removed after the wire is installed and used separately. This type of wire clamp has a bolt type tensile clamp and a wedge type tensile clamp. The second type: the tensile clamp is used as an electrical conductor in addition to the full tensile force of the wire or lightning conductor. Therefore, once this type of clip is installed, it can no longer be disassembled, which is also called a dead clip. Since it is an electrical conductor, the installation of the clamp must be carried out in strict accordance with the provisions of the installation and operation procedures. Tension clamps are used for cornering, splicing, and terminal connections. The spiral aluminum clad steel wire has strong tensile strength and no concentrated stress, which protects the optical cable and assists in damping. The complete set of optical cable tensile members includes: tensile pre-twisted wire and matching connecting fittings. The grip strength of the clamp is not less than 95% of the rated tensile strength of the cable. It is convenient and quick to install, reducing the construction cost. Applicable to ADSS cable lines with a pitch of ≤100 meters and a line angle of <25° [1]. effect The tension clamp is used to fix the wire or the lightning protection wire to the non-linear pole tower tensile insulator string, which acts as an anchor and is also used to fix the cable of the cable tower. advantage 1. Effectively eliminate short-circuit accidents caused by small animals such as birds and beasts or foreign objects; 2. Prevent electrical accidents caused by condensation, smudging, and icicles; 3. Prevent acid rain, salt spray and harmful chemical gases from corroding the transformer's incoming and outgoing lines; 4. Avoid personal injury or death caused by pedestrians accidentally touching bare electrical contacts; 5. The protective cover and metering device are fully enclosed to prevent illegal molecules from stealing electricity; 6. Fastened structure, easy to install and reusable .
ACSR Fitting Dead End Grips Clamp
Applicant and construction:
The products can be used in the main and branch distribution line
of bare overhead conductors and insulated wire.It can replace
the commonly used line Clamp.

Features:
1)structure is simple, can be easily installed
2)its legs twisted wire preformed and the formation of air traffic control, rear twist for the preforming ring.The formation of preformed wire legs wrapped in wire can produce a very strong grip force, twist the ring to fix the insulator.
3) The clamp distributing the stress uniformity, improved ability of aseismatic without any damage on conductor.
Materials:
The products can be made of Galvanized steel, Aluminium clad steel etc.
Note:
We have various kinds of power fittings, such as linking fitting, protective fitting,splicing fitting, clamps,connectors etc. Our most distinguished advantage is we can design or organized the complete suspension or tension insulator string according to your need. Please contact us for more information.SPECI AND DETAIL SIZProduct Overviewsworkshop and package