Waterproofing Membrane 4mm Waterproofing Membrane 3mm Waterproofing Membrane

Manufacturer spot APP/SBS 3mm 4mm roof waterproofing membraneProduct parameters Serial numberFetal basePYPolyester tireModelⅠⅡ1Soluble substance contentg/≥2mm-3mm21004mm29002Impermeablepressure,MPa0.3Keep time,min≥3.03Heat tolerance,℃90105No sliding, flowing, dripping4pull,N/50mm≥portrait500800transverse5Elongation at maximum tension,≥portrait3040transverse6Low temperature flexibility,℃-20-25No crack7Osmotic property,Number of sheets≤2Lower surface asphalt coating thickness mm≥1.0Product Details
SBS elastomer modified asphalt waterproofing membrane is made of SBS rubber modified petroleum asphalt as infiltration coating layer, polyester fiber non-woven fabric, jute cloth, glass fiber felt, etc. are respectively made into tire base, and plastic film is used for anti-adhesion. The separation layer is processed by the steps of material selection, compounding, eutectic, infiltration, composite molding, and curling BrandJie lang tespecificationPolyester(PY) ,Glass fiber(G) ,Glass fiber polyester(PYG)Surface materialPolyethylene film / Fine sand / Mineral grain materialthickness3mm/4mmlength10mLow temperature flexibility-5℃/-10℃/-20℃/-25℃Construction toolswelding torchProduct Features
1.Strong water impermeability.
2.High tensile strength, high elongation, strong adaptability to base layer shrinkage deformation and cracking.
3.Good low temperature performance, can maintain efficacy at -50 °C, suitable for hot and cold areas, especially in cold regions.
4.Puncture resistance, smash resistance, tear resistance.
5.Corrosion and mildew resistance. Good weather resistance.
6.Convenient construction, hot melt method can be operated in all seasons, and the joints are reliable.Construction method
SBS waterproof coil material hot melt construction:
1, brushing base treatment agent (same cold construction method)
2. The coil is placed at a predetermined position, and the base layer and the bottom surface of the coil are heated by a liquefied gas or a gas oil blower. After the surface asphalt is melted by a thin layer, the coil is rolled forward while being baked, and compacted by a press roll. Adjust the size of the flame, melt the asphalt on the surface of the coil, do not flow too much, and can not be baked.
3, the coil is overlapped in the vertical and horizontal directions of 10CM, and sealed with a blowtorch.
4, double waterproof, coil joints must be staggered according to regulations.
5, the thickness of the coil is less than 3 mm or the cladding material is aluminum film is not suitable for hot melt construction.Product Usage
1. Waterproof and moisture proof for roofing, wall, basement, bathroom, etc. of key waterproofing engineering and industrial and civil buildings;
2. Waterproofing of buildings such as bridges, roads, parking lots, swimming pools, tunnels, and reservoirs;
3. It is especially suitable for buildings with frequent structural deformation and cold areas; protection of pipelines and anti-corrosion layers, and protection and moisture protection.about us
Hebei Jielangte Waterproof Co., Ltd. is a modern research, production, sales and construction service provider.
high-tech enterprises. In 2007, it was awarded “Hebei Province Top Ten Building Waterproof Comprehensive Strength Enterprise”. In 2009, it was awarded “China Building Waterproof Industry Famous Brand”. In 2010, it was rated as “Advanced Unit of Hebei Province”. In 2013, it was recognized as “Provincial Waterproof”. The material research and development center has a total investment of 120 million yuan and covers an area of 100050 square meters.Contact us
1. Q:Are you a factory or a trader?
A:We are a factory trade company. We have registered two companies, one is responsible for production and one is responsible for international business.
2.Q:How to get samples?
A:We can provide you with free samples for testing.
3.Q:How long is the delivery time?
A:7 days after payment, depending on the quantity of your goods
4.Q:Accept OEM?
A:Yes, accept OEM
5.Q:Can we go to the factory to check the goods of the order?
A:Welcome to the factory to inspect the quality, we sincerely hope to establish a good business relationship with you.Mode of transport