Smart Robot Servo Servo Scs115 Robot Servo

LIKE Dynamixe AX-12 Smart Serial Servo FEETECH SCS115
FT-SCServo is meaning that Smart Control Servo was R&D and manufactured by FEETECH
The advantage of using UART BUS servo:
It is simple and beautiful wiring,Less occupied port and More precise control
It gives the feedback of the data relevant to position, voltage temperature, load and speed
Serial bus smart control servo fully integrated Motor, servo drive,
Serial bus communication interface and sensor together as one servo,Mainly used for micro robot joint, wheel, track drive,
Can also be used for other simple position control occasions.
about New FT-SCServo (Smart Control Servo) –SCS115/SCS106
1.FT-SCServo is meaning that Smart Control Servo was R&D and manufactured by FEETECH.The control size as below .
2.SCServo can work at servo mode and wheel mode.
The servo modecan be used to multi-joints robot since the robots can be controlled with specific angles.(The factory default settingis servo mode)
The wheel modecan be used to wheel-type operation robots since motors of the robots spin infinitely. (If wheel mode is available you need to program thevalue of position limitationthe both are 0.)
If you want to reprogram servo, you need to download the PC software (SCServo_Debug), and to connect SCPC-2(Serial Control Programming Card) between servo and PC.
More about SCServo_Debug and SCPC-2 introduce please reference its instructions.
3.SCServo has a unique ID number to identify on BUSnetwork.
The range from 0 to 253 (0xFD) can be used (The factory default settingis ID 1), and, especially, 254(0xFE) is used as the Broadcast ID. If the Broadcast ID is used to transmit Instruction Packet, we can command to all SCServo.
After programmed servo ID, to be best way is written it on the sticker of servo. If not, maybe you will forget the ID when you programmed many servos.
4.SCServo have kinds ofbaud rate available.
The baud rate from 38400 bps to 1M bpscan be used.
They are 38400, 57600,76800,115200,128000,250000,500000,1000000. (The factory default settingis 1000000bps)DimensionsWeightGear Type(Ratio)Bus InterfacePosition Sensor
(Resolution)Operating AngleControl SystemProtocol TypeIDCommunication SpeedFeedbackMotor TypeBearing TypeOperating VoltageStall Torque(Kg.cm)Stall Current(A) :Operating Speed(RPM)Connector(Wire Length)Stall torque is the maximum instantaneous and static torque
Stable motions are possible with robots designed for loads with 1/5 or less of the stall torqueOur Services
Specialized in ODM and OEM and Custom Made
Shipping
We adopt EXW term. Generally, we choose, DHL, FedEx, EMS or UPS as our forwarder. Of course, you can choose your own most favorable forwarder, and we would provide the freight bill according to the quantity and weight of the total products, Freight Collect can also be acceptable.
Payment
We adopt T/T payment methods. After we receive your payment, we will arrange shipment. All banking charges and interest are charged to purchasers.
Warranty Procedure
As long as you choose to use FEETECH products, you can enjoy the warranty service that we provide. Please print our Repair Request Form (.PDF, .DOC) and fill it out in its entirety, being as comprehensive as possible, in order to receive the best possible service.
Warranty Period
All FEETECH products are warranted against defects for a period of one (1) years from the date of purchase. During this period we will repair or replace (at our discretion) any defective products. You should always retain your original receipt as proof of the date of purchase.Contacts
Skype: jenny-fitec
Email: sales038(at) feetechrc.com
Contact:Jenny Deng(Sales)