RF5000A 500mA X-ray Radiography Fluoroscopy Machine

RF5000A 500mA X-ray Radiography & Fluoroscopy Machinegastrointestinal, limbs etc for common radiography, Beam Limiting Device radiograph and high KV radiography.Content
Technicalparameter
Power supply
Voltage
380V±38V
Frequency
50Hz±1Hz
Capacity
≥40kVA
internal resistance
≤0.17Ω
photography
Tube Voltage
44kv—125kv step regulation
Tube Current
32mA—500mA step regulation
Exposure time
0.02s—4s
Control interface
Touched LCD
fluoroscopy
Tube Voltage
44kv—110kv step:2kv continuous regulation
Tube Current
0.5mA—5mA continuous regulation
Digital Controlled X-ray TubePower Output
50kW (max), 30kW (min)
Tube Focus:Large Focus/Small Focus
2.0mm /1.0mm
thermal capacity
140 kJ(180 kHU)
Rotary anode speed
2700rpm
Micro-computer control digitaltube remote diagnostic tableMaterial of the tabletop
high strength,low absorb carbon fiber
Rotation of the table
90°~0°~-25°
Transverse travel of table
±110mm
Longitudinal travel of the photography holder and film spot device
≥720mm
X-ray Focus—film gauge
1100 mm—1500 mm
Full film photography size
8″x10″—14″x17″
Dividing method for spot film
Full film, half dividing,three parts dividing, four parts dividing
Control method for diagnostic table
Remote,table control,frequency conversion softstarting and stopping
beam limiter
Electric Multi-leaf
fixed bucky device for table
density 103L/INCH,grid:10:1 converge distance:120cm,fixed:15″x18″
Digital Image TV System
Image Intensifier
TOSHIBA (9″)Image Intensifier
high resolution CCD (digital cameras)
ultra-low-light,standard 0.47 mega-pixelMonitor
14 inch medical HDTV monitor,Horizontal center resolution1000/L, edge 800/L Visual bandwidth12.5MHz 10t Image 25/s
Digital Picture Processing System
(CCU Sentinel)
High Definition progressiveoutput mode, 8 level Noise Reduction,8 image storage, LIH, Vertical Image,Horizontal image flip, positive or negative image and OSDThis equipment is power frequency high voltage generator device controlled by microcomputer, can carry out the control of high voltage Transformer Assembly primary voltage, forcing time and the output of filament transformer. And have some more functions such as body part procedure photograph etc.
The main structure of this machine includes: diagnostic table, high voltage generator, console, X-ray tube monoblock assembly, collimator, and Electrical cabinet and so on,4.1 The console applies LCD display photograph and fluoroscopy datas, the device has the knob for choosing mA, kV, it has two tube settings, it’s controlled by procedure interlock, it’s separated and non-interfering when choose mA, kV, s for both photography and fluoroscopy.
4.2 The console controls the exposure time by MCU internal clock to get accurate exposure time. It lowers down maximally the exposure time errors due to the outside interference. With the microprocessor limited-time control, it achieves the precise exposure time control.
4.3 This machine adopts microcomputer monitoring anode start-up and operation, also the working state of filament heating circuit. Where the Anode can not start operation, tube filament off etc., MCU automatically displays the error code.
4.4 When select the exposure tube current, it can also get the focus. It can automatically switches to the focus when choose current, making the most adventage of the tube. With MCU control, it fully guarantee the filament heating time to ensure filament be heated to stable condition. When the photographic condition selections are completed, press the hand switch I, filament begin to heat up and delay under the control of the program, when press “hand switch” II, it starts to expose. After exposure, it returns to ready state.
4.5 The photograph high voltage compensation is made by software, to ensure more accurate tube voltage output under stipulated power conditions. At the same time, in the design of filament heating circuit, it provides a different filament heating circuit with different kV and mA , and improves the stable ray output.
Company Information
Packaging & Shipping
contact us