Fifth Generation Vacuum Microcrystalline RF No Needle Mesotherapy Machine

Product Details
Product Description
Technical Data
Voltage: AC 110V-220V
import Needle: Vacuum microcrystalline
import Technology: TDA
Feature: Radio frequency
Screen: 7inch LCD Touch
import depth: 3mm
Operating mode: Automatic
Operating language: English, Korean, Chinese
Operating part: Face, eye, body
Weight: 3KG
Gun Size: 28.8x4.5x16.2CM
Main body Size: 37x27x15CM
Instrument Principle
The five-generation micro-RF water ray spectrometer adopts 4 mega-focus RF technology imported from South Korea. The RF energy output is made of insulating silicone grease, RF micro-crystal.
It is completely insulated, RF energy is distributed throughout the silicon crystal, combined with hollow crystallites, and the skin is injected with sufficient nutrients. The RF temperature is from 40℃ to 65 ℃, which can be controlled at will, more accurately heat the skin tissue and promote subcutaneous collagen. Contraction and tension, medically known as radio frequency target thermocoagulation therapy, its biggest feature is that the dermis layer is heated and the epidermis maintains normal temperature. At this time, two reactions will occur: one is that the skin dermis becomes thicker and the wrinkles change. Shallow or disappear; second, the remodeling of subcutaneous collagen, resulting in new collagen, the skin becomes more compact after a treatment.
Operating
Preoperative preparation:
Step 1: ask the customer to fully remove makeup, and ensure that the face is clean and wiped with saline.
Step 2: Determine the treatment site and take a photo of the treatment.
Step 3: Make sure that the guest has removed all metal items and that no metal is in direct contact with the guest.
Step 4: Disinfect the operating accessories and the hands of the beautician with saline.
Step 5: The beautician must wear a mask, disposable gloves, and hair bundles to operate.
Pre-operation adjustment:
Ask the customer before the operation to determine the speed of the adjustment scale and operation.
Product discharge speed 1-20 range, according to product viscosity adjustment, generally 8-10.
The speed of the micro-crystal head is 1-20 steps, which is adjusted according to the customer's ability, generally in the 8-13 position.
The microcrystal head scale is 0-4mm, and the scale operation range is determined according to the skin thickness and sensitivity of the operation part (the total length of the scale is 4mm).
1. The length of the microcrystalline head is 3mm, which is suitable for the skin with thicker skin and serious problems.
2. The length of the microcrystalline head is 2mm, which is suitable for the operation of the face, neck and normal skin.
3. The length of the microcrystalline head is 1mm, which is suitable for thinner or sensitive skin and forehead.
Maintenance
1. In order to achieve a good course of treatment, the clinician may perform advanced repair procedures (such as masking, beauty care, cleaning, etc.) at the operation site as needed. Please consult with the treatment details.
2. Immediately apply ice to the operation site after operation.
3, try not to touch the raw water within 24 hours after the operation, and keep the operation part clean, do not over-massage and knead, and avoid the high temperature is a hot environment, can not be exposed to the sun for a long time.
4. Clean the operation area gently within two days after the operation to avoid slamming.
5. Do not wipe the operation area with ointment, skin care products or cosmetics after operation, and do not touch the operation area with your hands.
6. Avoid sauna or strenuous exercise within 5 days after operation.
Precautions
1. When operating, pay attention to the microcrystalline head must be applied to the face, do not press too tight, so as not to cause scratches when the steps are inconsistent when sliding.
2. The instrument uses high-energy focused RF. The RF energy must be adjusted from the lowest level during operation. When operating, it must be fully docile, otherwise there will be a burning sensation.
3. Before operation, the operator must check whether the RF energy of the microcrystalline head has output, adjust the energy to 1-2 files, and press the start time to enter the countdown. At this time, it is not necessary to press the black start switch on the handle, after disinfection. The finger touches the microcrystalline head and feels whether there is energy.
4. The probe must first be attached to the face to activate the black switch button.
5. The guest's face, can not be disinfected with alcohol and hydrogen peroxide, to avoid some customers allergic to such disinfection products, needles need to be soaked with 75% alcohol for 5 minutes to disinfect.
6. The operating time normal half face 15-20 minutes, the entire face about 30-40 minutes, such as thin skin or sensitive muscles should reduce the operating time as appropriate.
7. It is normal for the skin to have a slight redness and tingling heat during and after the operation.
Prohibit the use of people
1. People who are allergic to the skin are forbidden.
2. Ban during pregnancy, lactation.
3. Patients with major diseases (with pacemakers, cancer, etc.) banned.
4. The minister is full of pustule-type acne banned.
5. The face has open wounds are forbidden.
6. The face has a filling or injection of hyaluronic acid should avoid the corresponding parts of the operation.
Packaging & Shipping
Company Information