Polymer Sand Extruder for Making a Composite and Producing Roof and Pavement Tiles, Sewer Covers

Product DetailsPolymer sand extruder machine
The use of polymer sand plastic processing equipment solves not just the polymer waste recycling problem but number of other problems (cleaning of urban landfills, environmental problems) and it is also arranging profitable production of building and finishing materials: paving and facing tiles, curbstone, various bas-reliefs and flowerpots , sewage manholes, roofing tiles, insulating sleeves for power cable, etc.


The machine for making the thermoplastic composite as result of mixing and heating the components of the polymer sand mix.
After you get the received preheated mass out of extruder it is placed in a mold on a molding press to produce polymer sand finished product.
The machine is used in the polymer-sand complex. The main advantages of our extruder are:
• heating control that is fully automatic - automatic monitoring of temperature lets us (you?) to avoid human factor errors and also helps to save the energy;
• induction heating takes place in four working areas to reduce heating inertia and avoid the risk of mix burning ( plus it also helps to save the energy);
• high capacity (the prepared composite is sufficient for the operation of two presses), this is due to the optimally selected length and diameter of the tube (mixing chamber) of the extruder, where the mixing and heating takes place;
• powerful and very reliable drive and screw units;
• maintenance-free bearing units are put out;
• the ability of working in 3-shift mode without reducing the warranty;
• a full 1 year warranty.
The extruder consists of electric motor, reducer, feeding hopper, protective cover for a heating elements, shut-off valve that are mounted on the rack and remote control. The rotation from the motor is transmitted through the V-belt drive and the reduction gear to the screw. The screw is a shaft on which windings and blades are attached. The screw consists of 3 parts. The working part of the screw is located in the pipe and closed on both sides by flanges. At the front of the tube is a hopper for loading components. The outlet flange of the extruder is equipped with a shut-off gate.POLYMER SAND COMPLEX PRODUCTION:
polymeric sand equipment is suitable for the production of polymer sand materials: tiles, manholes, sewer covers, facing tiles and other building materials.
Our complex of equipment is a modern high-performance equipment for the production of a wide range of polymer-sandy materials: construction, roofing, finishing and landscaping elements:
* roof tiles - more than 100 m2 per shift;
* sewage polymer sand hatches and covers of inspection hatches (light, medium series): - more than 50 pieces per shift;
* polymer sand sidewalk tiles, paving stones;
* polymer-sand tiles, facade, basement, terracotta tiles - in various shapes, sizes and colors;
* curbs, trays, gutters and other elements of improvement.
Product IntroductionHow does it work?
All of the components (polymer, sand, dye) are loaded into the extruder hopper. The shut-off device must be closed during the loading of the components. The components are going through the extruder body (rack) are mixing and heating until it gets a certain temperature (the temperature depends on the type of polymer used).
The temperature is maintained and controlled automatically by the controller. At the same time, the power consumption is small and induction coils operate alternately to maintaining a certain temperature).The mixed and heated mass exits out of the extruder in a certain portion that is regulated by the shut-off. Then the mass is transferred to the mold of the press for further forming.Product ParametersTechnical characteristicsParametrProductivity of the finished product 150 ... 250 kg / hScrew rotation speed 25 rpmTemperature control range 100 ... 400 °CTemperature error 0,1 °CDirection of screw rotation clockwise from the side of the reducerPower supply voltage / frequency 380V, 50Hz Total power of the extruder 51 kWExtruder drive power 11 kWPower induction heaters 40 (10 x 4) kWOverall dimensions 4270 x 935 x 1370 mmWeight1750 kgProduct Details ShowWhy Choose Us

We can produce you with an auxiliary polymer sand equipment: tables for goods lagging, belt conveyors, supplies, oil stations, roller conveyors, press of small tonnage;
According to your drawings or finished materials we are able to produce any molds for the production of shingles, facing tiles, hatches and other.Producing processProduct PackingAs a resultRoofing polymer sand elements

Polymer sand landscape tiles

Polymer sand manholes

Polymer sand roof tiles

Polymer sandsewer covers

Polymer sand tiles


Polymer sandtiles, polymer sand manholes,polymer sand sewer covers, polymer sand facing tiles, polymer sand building materials,polymer sandcurbs, polymer sand trays, polymer sand gutters,polymer sand sidewalk tiles, polymer sand paving stones.sewage, polymer sand hatches, covers of inspection hatches