m95 mask machine manufacturer m95 face mask machine

m95 mask machine manufacturer m95 face mask machine
N95 Making Machine
The working process of N95 Mask Machines are as follows: the multi-layer non-woven fabric rolls are subjected to compound roll welding after feeding. Nasal lines are welded after unwinding and cutting. Two rolls of earbands are welded after automatically unwinding and cutting to fixed length. Then masks are folded in half. After ultrasonic welding and fusion, the masks are rolling-cut and formed.
Model
MSM-2020
Movement control
PLC programming control
Compressed air
0.6~0.8 MPa,flow rate about 200L / min
Power
380VAC ± 5 %, 50HZ, rated power about 15KW
Weight
≤5000kg,Ground load≤500KG/m2
Ultrasonic power
2KW*5 units(form welding 2 units ,earband welding 2 unit, nasal line 1 unit)
Servo motor
1.3KW*1 unit
Reducer motor
15W*2 units
Outfeed motor
25W*1 unit
Power controller
0.25KW*3 units
Dimension
L1050*W150*H220cm
Speed
60pcs/min(depends on the thickness of material)
Operating environment
temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanliness no less than 100,000)
1.The masks made by the machine have great filtration effect, perfectly fitted and are comfortable to wear without causing any pressure.
2. N95 Mask Machine uses PLC, touch screen control and the main conveyor adopting motor transmission, which can achieve precise movement and adjustable speed.
CLICK TO Get Recommended Solutions


Semi-Auto-N95
Flat Mask Machine
Automatic flat mask making machine with double output
Production efficiency: 90-110ppm;
This machine is mainly used for the automatic forming of flat masks: the whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed. In the fabric, the two sides are ultrasonically welded to the seal, and then the ultrasonic side seal is cut and formed by a cutter; the mask is conveyed to the two mask earband welding stations through an assembly line, and the final mask is formed by ultrasonic welding; when the mask is made After completion, it is transported to the flat belt line for collection through the assembly line.
1.3 Equipment installation and configuration requirements
(1) Equipment size: 6600mm (L) x 3600mm (W) x 2000mm (H);
(2) Appearance color: sheet metal RAL7035 (Jianhua standard color), unless otherwise specified, follow this standard;
(3) Equipment weight: ≤1800kg, ground load ≤180KG / m
(4) Working power: single-phase equipment 220V, 50HZ, rated power about 10KW;
(5) Compressed air: 0.5 ~ 0.7 MPa, using flow rate of about 300L / min;
(6) Operating environment: temperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness no less than 100,000)
(7) Operator: 1 person
Serial NO.QuantityWater filter cloth/
filter cotton/water absorbing layer unwinding mechanism
3 SETSNose strip release mechanism
1 SETBridge of the nose strip drive, cutting mechanism
1 SETFabric folding mechanism
1 SETSeam sealing mechanism
1 SETCloth driving mechanism
1 SETTransfer line
2 STRAPShunt institutions
2 SETSEar band welder mechanism
2 SETSBlanking line
2 SETSOperating system
1 SETOperation panel
1 SET
Surgical Flat Mask