Self-adhesive Fiberglass Tape
63g/m2, 8x8, 1" x 30m
Brief introduction
Fiberglass adhesive mesh is made from C-glass or E-glass woven fabric then coated by acrylic acid copolymer liquid and adhesive glue. It is widely used for Exterior Insulation Finishing Systems(EIFS), Waterproof Roofing and Stone Reinforcement.
Features
1.Self adhesive, mildew and rot resistant, Heat proof, cold proof, fire resistant, thermal insulation.
2.Good chemical stability: alkali resistant, acid resistant, waterproof, cement erosion resistant.
3.Good dimensional stability: with stable resin bonding and high tear strength, smooth, shrink and deformation resistant.
SPECIFICATION Usage
The use is easy and fast, no pre-plastering required, no bubbles. It is used to cover or repair joints, cracks and holes on walls, roofs, etc.
1. Wall must be clean and dry.
2. Center and apply tape over the length of the joint and pressing firmly.
3. Apply a generous first coat of compound over the tape and through the mesh, making sure to completely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough fill the joint crevice. Let dry completely ,then sand slightly.
4. Apply sufficient thin finishing coats to produce a smooth wall surface.
5. Cut of butted do not have a tapered edge. Therefore, special care must be taken to assure proper compound that will require an increased amount of edge feathering.
Packing:
cardboard core, each roll in shrink wrapping poly bag, or shrink proof poly bag, standard export cartons, maybe with pallet, as required.
50mm x 20m 100 rolls in one carton; 50mm x 45m 48 rolls in one carton;
50mm x 90m 24 rolls in one carton; 50mm x 150m 16 rolls in one carton.