RongPeng Professional Air Tool 1/2 "impact wrench Model RP9061-2/LT50 Dimension80x280x303mmRequired pressure60-100PSI (4-7bar)
Max.pressure120PSI(8.3bar)Nail Capacity90pcsWeight2.3kg (5.0Lb)
Feature Description :
FEATURE Quick clear nose.Non-marring rubber driver tip.
Air Tools Trouble Shooting: Air tools runs at normal speed, but loses under load
Motor parts worn
Cam cluth worn or sticking due to lack oflubricant
Lubricating clutch housing.
Check for excess clutch oil.
Clutch cases need only be half full Overfilling Can cause drag on high speed clutch parts,is a typical oiled/lubricated wrench requires 1/2 ounce of oilAir tools runs slowly, Air flows slightly from exhaust
Air tools's motor parts jammed with dirt particles
Power regulator in closed position
Air flow blocked by birt
Check air inlet filter for blockage.
Pour air tools lubricating oil into air inlet as per instructions.
Operate tool in short bursts quickly reversing rotation back and forth where applicable.Repeat above as needed.AirAir tools will not run, Air flows freely from exhaustOne or more air tools's motor vance stuck due to material build up
Pour air tools lubricating tool into air inlet
Operate tool in short bursts of forward and/or reverse rotation where applicable
Tap motor housing gently with plastic mallet
Disconnect supply. Free motor by rotating drive shank manually where applicableAir tools will not shut offAir tools's "O" rings throttle valve dislodged from seat inlet valveReplace air tools's"O" ring
Main Products
Showroom