Transparent Silicone Liquid Silicone Rubber Rtv2 Silicone Rubber

Product DescriptionPourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-componentmaterials.Resistance high temperature of 250℃,shrinkage rate lower than 0.1%.
Addition silicone rubbers can be applied to PU resin casting, general mold making, GRC and concrete molding, superior manual mold design, food grade molding application, rapid prototyping(urethane casting/ silicone tooling/ vacuum casting).
• Almost nil shrinkage, cure at room temperature
• High Shore A hardness (approx.40)
• Good transparency, high tear strength
• Food grade silicone(environmental, odorless and nontoxic)
• High resistance to high temperature and aging(resist -60 to 150℃)
• High chemical resistance to aggressive components of some types of resins
• Outstanding resistance to common casting resins
The platinum catalyst is in component B.A and B components may only be used together if they have the same batch number. Addition silicone rubber can react with compounds such as phosphorus, ammonia, acid, mercaptan, it will produce harmful substances.
Product data
Typical general characteristics
Inspection Method
Value
Product data(uncured)
Component A
color
Transparent
Viscosity, dynamic at 23℃ , after stirring
DIN EN ISO 3219
50000±5000 mPa.s
Density at 23℃
1.10g/cm³
Component B
color
colorless
Viscosity, dynamic at 23℃ , after stirring
1000±500 mPa.s
Density at 23℃
1.00 g/cm³
Product data (catalyzed A+ B)
Viscosity at 23℃
ISO 3219
45000±5000 mPa.s
Mix ratio(pbw)
A:B
10:1
Processing time(min)
60
Cure time (H)
8-12
Product data (cured)
color
transparent
Density at 23℃ in water
ISO 2781
1.10g/cm³
Hardness Shore A
ISO 868
40±2
Tensile strength
ISO 37
>6.0MPa
Elongation at break
ISO 37
>350%
Tear strength
ASTM D 624 T
>16N/mm
Tear strength
ASTM D 624 B
>258.8N/mm
Linear shrinkage
<0.1%
Pot life(min)
30-40
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
1.Ratio 1:1, the packing of base A and Catalyst B
40kg/Set(base A 20kg+ B catalyst 20kg)
400kg/Set(base A 200kg+ B catalyst 200kg)
2.Ratio 10:1, the packing of base A and Catalyst B
22kg/Set(base A 20kg+ B catalyst 2kg)
220kg/Set(base A 200kg+ B catalyst 20kg)
Components A and B of the addition-curing gradecontain only constituents that over many years have proved to be neither toxic nor aggressive. Special handling precautions are therefore not required.
The information and recommendations in this publication are to the best of our knowledge reliable. However nothing herein is to be construed as a warranty or representation. Users should make their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes. Statements concerning the use of the products described herein are not to be construed as recommending the infringement of any patent and no liability for infringement arising out of any such use is to be assumed.More Product
Company Information
Established in 1999, Dongguan Rongxin Silicone Technology Co.,Ltd is a manufacturer and trader specialized in polymer material, development and production of silicone rubber. We are located in Tangxia dongguan, with convenient transportation access. And we have set up an office in 2012, Shenzhen Rongxingda Polymer Material Co.,Ltd. All of our products comply with international quality standards and are greatly appreciated in variety of different markets through out the world.If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationship with new clients around the world in the near future.Certifications
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction.We have pass a lot of certifications. Such as FDA, RoHs, MSDS, ISO and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.Packaging & Shipping