CE and FDA Approved New Design Female Laboratory Diagnosis Hcg Card

How to do the test
1. When you are ready to begin testing, open the foil pouch by tearing along the notch. Take the test out of the pouch and remove the cap. You can place the cap at the end of the test as handler.
2. With the test pointing downwards, hold the absorbent tip in your urine stream for 2-3 seconds (please do not stream pass the arrow end and not to splash the show window). Then you might replace the cap on the absorbent tip.
3. Hold the test for a few seconds or lay the test flat. When you see the urine pass the show window and red line appear, the test is complete and has worked correctly. Read the result at 5 minutes but no longer than 15 minutes.
Note: Any urine specimen is appropriate for the HCG test midstream, but if you have just begun your pregnancy, the first morning urine is optimal.
How to read the results
Read the result at 5 minutes but no longer than 15 minutes. A red line appears in the right sector of the result window. That is the control line, which indicates the test works properly.
*Negative: If there is only one red line in the show window, it means that you are not pregnant.
*Positive: If there are two red lines appear in the show window, it means that you are likely to be pregnant.
*Invalid: A total absence of red lines in the show window is an indication of procedure error and/or that test reagent deterioration has occurred. You should do the test again using a new pregnancy test and follow the test procedure carefully.
Click on this text, I believe we will bring you more surprises!