Reagent strips for Urinalysis 10 parameters

Product Description
Diagnostic Urine Test Strips with 10 Parameters
Urinalysis strips 10 parameters are very resistant to interference from ascorbic acid (vitamin C). Some strips on the market are prone to vitamin C interference and give falsely-lower or false-negative results. The tests that are most affected are blood, glucose, bilirubin and nitrite.
1) Rapid Results30 seconds to 2 minutes
2) High Quality Color Chart Superior European-produced color charts provide consistent,
dependable readings
3) Flexible Available in up to 12 parameters
4) Cost Effective25, 50, or 100 strips per bottle, with performance better than or equal to the current
market leader at a much lower price
Intended Use:
The Urinalysis Reagent Strips (Urine) are firm plastic strips onto which several separate reagent areas are affixed. The test is for the qualitative and semi-quantitative detection of one or more of the following analytes in urine: Ascorbic acid, Glucose, Bilirubin, Ketone (Acetoacetic acid), Specific Gravity, Blood, pH, Protein, Urobilinogen, Nitrite and Leukocytes.
The following table below indicates read times and performance characteristics for each parameter. ReagentRead
TimeCompositionDescriptionAscorbic Acid(ASC)30 seconds2,6-dichlorophenolindophenol;
buffer and non-reactive ingredientssDetects ascorbic acid as low as 5-10 mg/dL (0.28-0.56 mmol/L).Glucose
(GLU)30
secondsglucose oxidase; peroxidase;
potassium iodide; buffer;
non-reactive ingredientsDetects glucose as low as
50-100 mg/dL (2.5-5 mmol/L).Bilirubin
(BIL)30
seconds2, 4-dichloroaniline diazonium
salt; buffer and non-reactive
ingredientsDetects bilirubin as low as
0.4- 1.0 mg/dL(6.8-17 μmol/L)Ketone
(KET)40
secondssodium nitroprusside; bufferDetects acetoacetic acid as low as 2.5-5 mg/dL (0.25-0.5 mmol/L).Specific
Gravity
(SG)45
secondsbromthymol blue indicator;
buffer and non-reactive
ingredients; poly (methyl vinyl
ether/maleic anhydride);
sodium hydroxideDetermines urine specific gravity
between 1.000 and 1.030. Results correlate with values obtained by refractive index method within ±0.005.Blood
(BLO)60 seconds3,3’,5,5’ tetramethylbenzidine
(TMB); diisopropylbenzene
dihydroperoxide; buffer and
non-reactive ingredientsDetects free hemoglobin as low as 0.018-0.060 mg/dL or 5-10 Ery/μL in urine specimens with ascorbic acid content of< 50 mg/dL.pH 60
secondsmethyl red sodium salt;
bromthymol blue; non-reactive ingredientsPermits the quantitative
differentiation of pH values
within the range of 5- 9.Protein
(PRO)L)60
secondstetrabromophenol blue; buffer and non-reactive ingredientsyDetects albumin as low as 7.5-15 mg/dL (0.075-0.15 g/L).Urobilinogen
(URO)60
secondsp-diethylaminobenzaldehyde;
buffer and non-reactive
ingredientsDetects urobilinogen as low as 0.2-1.0 mg/dL (3.5-17 μmol/L).Nitrite
(NIT)60
secondsp-arsanilic acid; N-(1-naphthyl)ethylenediamine; non-reactive ingredientsLDetects sodium nitrite as low as 0.05-0.1 mg/dL in urine with a low specific gravity and less than 30 mg/dL ascorbic acid.Leukocytes
(LEU)120
secondsderivatized pyrrole amino acid
ester; diazonium salt; buffer;
non-reactive ingredientsDetects leukocytes as low as 9-15 white blood cells Leu/UL in clinical urine.
Testing procedure:
1. Remove the strip from the closed canister and use it as soon as possible. Immediately close the canister tightly after removing the required number of strip(s). Completely immerse the reagent areas of the strip in fresh, well-mixed urine and immediately remove the strip to avoid dissolving the reagents. See illustration 1 below.

2. While removing the strip from the urine, run the edge of the strip against the rim of the urine container to remove excess urine. Hold the strip in a horizontal position and bring the edge of the strip into contact with an absorbent material (e.g. a paper towel) to avoid mixing chemicals from adjacent reagent areas and/or soiling hands with urine.See illustration 2 below.

3. Compare the reagent areas to the corresponding color blocks on the canister label at the specified times. Hold the strip close to the color blocks and match carefully. See illustration 3 below.

Note: Results may be read up to 2 minutes after the specified times.
Test parameters
URS-10T,URS-11,URS-12MA
wave lengthTest speedMemory Sizeoptional
10, 11 OR 12 parameters
PrintHost-communicationLanguage
English
Environment Condition
0-40°C,RH< 85%
Power SupplyPowerCarton Dimensions(L/W/H)
Safecare Biotech currently mainly offers in the following specialties: Fertility, Infectious Diseases, Sexually-Transmitted Diseases, and Tumor Markers, Cardiac Markers, and Substance of Drug Abuse tests in strip, cassette, and midstream formats. Welcome to contact with us.
Certifications
about us
Related Products
More Products

Production Process
Package & Delivery
FAQ
Q1: Are you a manufacturer?
Yes, we are manufacturer based in Hangzhou,China with 165 workers, 8000 non-dust workshop,
advanced automate machines and professional R&D team ensure the high quality, speedy delivery and large production capacity.
Q2: Can we put our logo/text on the products or package?
Yes, we can do OEM or even ODM. All of our products can be customized.
Q3: Can you provide free samples?
Yes, free samples are available.
Q4: How long is your production time?
Our production time is usually two weeks after receiving the deposit and four weeks for one container order quantity.
Q5: What is the MOQ?
Small quantity like 1000pcs is available.
Q6: How to make the payment?
By T/T, L/C, Paypal, Western union and Alibaba trade assurance order is also acceptable.