Sightseeing Lift Sightseeing Elevator Sightseeing Elevator

Sales sightseeing lift elevator
Standard Function VVVF DriveMotor rotating speed can be precisely adjusted to get smooth speed curve in lift start, travel and stop and gain the sound comfort.VVVF Door OperatorMotor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop.Independent RunningThe lift can not respond to outer calling, but only respond to the command inside the car through the action switch.Automatic Pass Without StopWhen the car is crowded with passengers or the load is close to preset value, the car will automatically pass the calling landing in order to keep maximum travel efficiency.Automatically Adjust Door Opening TimeDoor-open time can be automatically adjusted according to the difference between landing calling or car calling.Re-open with Hall CallIn the door shutting process, press reopen with hall call button can restart the door.Express Door ClosingWhen the lift stops and opens the door, press door-shut button, the door will be closed immediately.Car Stops and Door Open The lift decelerates and levels, the door only opens after the lift comes to a complete stop.Command Register CancelIf you press the wrong floor command button in the car, twice continous pressing of same button can cancel the registered command.Direct ParkingIt compeletely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency.Lighting Screen ProtectionIn the door open and shut period, infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects.Designated StopIf the lift can not open the door in the destination floor out of some reason, the lift will close the door and travel to the next designated floor.Overload Holding StopWhen the car is overload, the buzzer rings and stops the lift in the same floor.Anti-stall Time ProtectionThe lift stops operation due to slippery taction wire rope.Start Protection ControlIf the lift does not leave door zone within the designated time after it gets started, it will stop the operation.Inspection OperationWhen the lift enters into inspection operation, the car travels at inching running.Fault Self-diagnosisThe controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation.Repeated Door ClosingIf the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries are eliminated.Up/down Over-run and Final Limit ProtectionThe device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of the control. It results in the more safe and reliable lift travel.Down Over-speed Protection When the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains, stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety.Upward Over-speed Protection DeviceWhen the lift ups 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift.Micro-touch Button for Car Call and Hall CallNovel micro-touch button is used for operational panel command button in the car and landing calling button.Floor and Direction Indicator Inside CarThe cars shows the lift floor location and current travel direction.Floor and Direction Indicator HallThe landing shows the lift floor location and current travel direction.Emergency Car LightingEmergency car lighting automatically activated once power failure.Inching RunningWhen the lift enters into emergency electric operation, the car travels at low speed inching running.Five Way IntercomCommunication amid car, car top, lift machine room and rescue duty room through walkie-talkie.BellIn emergency conditions, if bell button above car operation is continuously pressed, eletric bell rings on the top of the car.Fire ReturnIf you start key switch in main landing or monitor screen, all the callings will be cancelled. The lift directly and immediately drives to the designated rescue landing and automatically opens the door.Car Light Automatic Shut-offIf there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save energy.Locking ReturnThe lift can be called to main landing (after finishing the service) through the key switch and automatically exists the service.
Company Profile
1.Shaanxi Sanjin Elevator Fittings Co.,Ltd is a large enterprises of elevator parts.Since the company established,to realize worker's dream is the base, to meet customers demand is the purpose.All members work hard by real heart for his future.In the course of communication with customers,they win every customer smile through their Faith and hard work.,Meanwhile they get great soul enjoyment.
2.We now have value USD 6,000,000 pcs elevator parts in stock with 4,000 kinds.which is unique in China.
Spare parts (Board, push button ,switch,service tool,inverter,...)
Kone spare parts (PCB,DRIVE,door motor,)
Mitsubishi spare parts
LG/sigma spare parts
Schindler elevator parts
Fuji lift parts,and so on.
Commercial Terms
1.Each part is enclosed in a corrugated cardboard pack.We carefully pack all parts.
2.Payment type----TT/Western Union/L/C/Paypal/Aliexpress
3.a.By air (DHL / Fedex / TNT/ UPS / EMS)
b.By Sea
Service Information
1.We can supply the best service for cutomers.
2.We must send goods to customer on time.We never delay the delivery date.
3.We promised that if our products have some problem ,we will change the goods for customers and we pay the freight.
Enterprise honor
We will get back to you ! Your satisfaction is our motivation of work !