CE FDA approved PC based OLED Display Fingertip Pulse Oximeter

PC based fingertip pulse oximeter
Display Mode Segment
0.96" Dual-color OLED display(blue and yellow)
Major Features
With SpO2 value and pulse rate value of storage, the storage data can be uploaded to computers

Small in volume,light in weight and convenient in carrying
Operation of the product is simple ,low power consumption
SpO2 value display Pulse rate value display, bar graph display Pulse waveform display
The display mode can be changed you can check the number from four direction
Have six models to show the number
Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe.
Screen Resolution 128*64

SpO2 Measuring Range 0%~100%, (the resolution is 1%).
Accuracy 70%~100% ±2% ,Below 70% unspecified.
PR Measuring Range 30bpm~250bpm, (the resolution is 1bpm)
Accuracy ±2bpm or ±2% (select larger)
Measurement Performance in Weak Filling Condition SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).
Resistance to surrounding light The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.
Power Consumption less than 30mA.
Voltage DC 2.6V-3.6V
Power Supply 1.5V (AAA size) alkaline batteries x 2
AccessoriesSell in standard a hanging ropea user manual a disk (PC software)