Building Material Stainless Steel Building Materials Metal Expansion Joint

Product DescriptionProduct Benefits1.Prefabricated leave-in-place free movement joint system wih a function of formwork2.A wide range of integral load transfer mechanisms to suit all floor loadings.3.Heavy Duty performance with cold drawn steel for extreme armouring of joint arrises.4.Easy and fast installation with a help of fixing devices.5.The system enables flooring contractors to cast industrial concrete floors for the high flatness category and super flat floor constructions.
Product is suitable for following facilities
warehouses factories logistics centers car parks depots
Material and DimensionsAFJ Joint is designed for floor slab thickness from 100mm to 300mm, and joint opening upto 20mm.For the rest of slab thickness and joint opening, ReTop is able to design and supply the jointsas per customer requirements.AFJ Joints provided with variant versions such as plain steel, hot dip galvanized, stainlesssteel to all working environment.AFJ Joints covers not only all standard products, but also intersections, such as 4-wayssction, 3-ways section, “L" 2-ways section and rounded section.ReTop provideds the column isolators with circular and rectangular versions for customerto select
MaterialsVersionJoint arris
armouringsheet steel dividerPlate dowelShear studDowel sleeveAFJ Joint Plain
steels235JRC+CDC01 HDGs355J2+Ns275JRHDPP GreenAFJ Joint HDGs235JRC+C HDGDC01 HDGs355J2+N HDGs275JR HDGHDPP GreenAFJ Joint
stainless1.4301DC01 HDGs355J2+N HDGs275JRHDPP GreenAFJ Jointacid proof1.44011.44011.44011.4301HDPP Green




Configuration & Formation




Plate Dowel TypePlate
TypeSize
B x HPlate
Thickness
TJoint
Opening
WFJD 6146mm x 150mm6mm0-15mmFJD 10146mm x150mm10mm15-20mm
Dimentions (mm)AFJ TypeJoint Height
H (mm)Dowel TypeDowel Centers
c/c (mm)Joint Length
L (mm)Suitable Slab
Thickness
H (mm)AFJ6-90-300090FJD 65003000100-120AFJ6-115-3000115FJD 65003000120-145AFJ6-135-3000135FJD 65003000145-170AFJ6-160-3000160FJD 65003000170-195AFJ6-185-3000185FJD 65003000195-225AFJ6-215-3000215FJD 66003000225-250AFJ6-230-3000230FJD 66003000245-270AFJ6-245-3000245FJD 66003000260-300


Resistances for AFJ Joint
All the resistances of AFJ Joint dowels are worked out according to TR34. Concrete Industrial Ground Floor, 4th Edition.
The data shown in below tables or single plate dowels only.Dowel TypeConctete GradeJoint Opening
(mm)Shear Psh
(KN)Bearing/Bending
Pmax Plate
(KN)FJD 6C3515141.940.7FJD 10C3520236.577.4




Design punching shear resistance (KN) of FJD 6 according TR34.4 for 15mm joint openingSlab thickness
(mm)Punching Pp
C30Punching Pp
C35Punching Pp
C40Punching Pp
C45Punching Pp
C5010012.713.514.415.116.115020.221.422.923.925.620029.030.732.934.436.725039.241.544.446.449.630050.753.757.460.064.1
The punching shear resistances are calculated for plain concrete ONLY, and according TR34.4 should be used also for
steel and macro-synthetic fiber reinforced concrete. TeTop is able to design and manufacture AFJ Joint with resistances
for other joint openings or concrete grades are needed.Guide for AFJ Joint installation
Step 1. Sub-bass level
The sub-base must be made as accurate and level as possible to the requirements on the slab drawing. The tolerance
of the level has to be taken into account when ordering joints. Typically the Joint height will be 10mm to 35mm less
than the slab depth.
Step 2 Joint location
The required layout, position and height of the joints will be specified on the floor slab drawing which must be followed
closely. String lines are placed to identify the position of joints according to the slab lay-out dimensioned drawings.
Step3. Joint installation with help of AFJ-FixStep4. Pouring concrete with poker
once joints are correctly positioned pouring of concrete
can commence. Concrete should be poured to the
surface level of the top strip with particular attention
to consolidation around the dowels and sleeves. All
plate type dowels require close attention to filling
around the dowels to eliminate the possiblity of air
entrapment. This should be done with a suitable
vibrating poker. Both sides of joints can be poured at
the same time if so required.Step 5. Re-check joint height
After the use of the poker vibrator, check the installed
height of the joint once again. The joint may lift within
the concrete when compacted following the use of the
poker vibrator.


Step 6. Remove concrete excess
It's important that any concrete excess is removed from the top of the joint during finishing operations,so thatthe top of the joint is visible when concrete works are complete.

Related ProductsAFJ "+" 4-ways sections
91.8% Response RateAFJ "T" 3-ways sections
91.8% Response RateAFJ "C" circular sections
91.8% Response RateAdvantages Our Company
Re Top-led SCM(Shanghai)Co.Ltd was established in Shanghai in 2010.Which owned 1000square meters’manufacturing base in Wuxi city.
Re Top engaged in researching developing,manufacturing and marketing the products of concrete connections and composite beams for both precast and cast-in-situ,Re Top protucts are widely used in warehouses,factories,logistics centers,car parks and depots.Re Top’s innovative solutions make your construction process faster,safer and mor effective.


Packing & DeliveryPackagingSize3250(L) * 1060 (W) * 1250 (D) Weight1.35T
Packaging DetailsThe normal package is 35 pieces in one slatted crated (Size: L*W*H). We also can pack it according to customers special request.