XPS sandwich insulated wall panel machine

Product Description
The production line adopts the technology of double-drive double-roller extruding, and the product is
formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing. the wall board production line runs stably with high automatic degree, the specification of its product can be adjusted
arbitrarily.

Advantages
Number
Item
Content
1
Low cost
Low labour and raw materials costs
2
Long life
Up to 30 years
3
Recycling use
Reused for more than 8 times
4
Environment protection
Environment-friendly raw materials used
5
Flexible layout
adjusted according to your requirement
Equipment components
This automatic mgo board production line in China is made up of two parts, Board making machine line and Board four-sides cutting machine Line

Board Making machine Line

NO.
name
Function
Size (mm)
Power(KW)
Quantity(set)
1
Slurry mixer
Mixing cement mortar of up and own materials
2300x820x820
3
2
2
Main mixer
Mixing middle materials
2800x1500x1300
18.5
2
3
Crusher
Crush and collection material after cutting
1960x880x1070
11
1
4
Duplex units feed in mould board
Automatic feed-in mould board on the main formed units, no need by manual, can reduce labor, improve work speed.
4800x3100x2800
1.5
1
5
Main formed units
It includes all of device of automatic feed-in cement mortar, fiber cloth, spreading, one-time forming and etc.
00x1800x1500
11.5
1
6
oil brusher
It can adhibit the PVC paper on the mould board by automatic. (Or brush the oil on the mould board)
2700x1600x800
1.1
1
7
Automatic tracking cutting device
It can cut the product on production line when it's wet, and it will not hurt the product and mould board, reduce the labor, low labor intensity .
4500x2000x1450
2.45
1
8
Hydraulic lifter of receiving board system
It can load the formed board on the form rack, reduce labor, reduce hurting the board when by manual, and improve automatic.
2700x3800x1700
9.6
1
9
PLC Control system
Control the production line automatic.
750x500x1800
1
project features
1. The source of the production raw materials is widely with no regional restriction. The product is made of magnesia, mgcl2,fiber glass mesh, on-woven fabrics,EPS ,cement and other fillers. The board is formed one-time by the machine. It is easy operation, low production cost, small investment and fast effectiveness.2. The automatic wall panel production line has high automatic degree, simple production technology, low labor intensity and production line is no noise and three wastes (waste water, waste gas and waste residue) during production.3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure. 4.It can produce according to different customers' request like size (length* width*thickness) , material .
wall panel features
1. Anti-earthquake with light quality:
In view of its weight per unit area is only 1/10 of red brick wall, the product has good anti-earthquake performance. It can be used at low-rise building and high-rise building, and it is preferred to be used at workshop with steel frame structure. It can replace the color steel plate with its better performance.2. Fast and convenient operation:
It can be installed by board or combination with the dry method, and the product can be nailed, cut, planed, drilled and sticked. 3. Low comprehensive cost:
The product is made of agricultural and industrial wastes, so the production cost is low. With the low load of girder and short construction period, it can reduce over 20% of engineering cost after compared with solid brick and hollow brick.4. Energy-saving and environmental protection:
The production processing need no high temperature and high pressure. Being a green environmental-protection energy-saving building materials, the product has no toxicity, harm, pollution and radioactivity.5. Increasing the usage area:
Under the same condition of heat-preserving and sound insulation, with the thinner plate, the product can increase over 10% usage area after compared with the same building.6. Having the following features:
fireproofing, water-proof, anti-impact, acid & alkali resistant and anti-aging.

application
Packing & Delivery
Our Service
1. Full life-cycle value services:
Our company provides latest building materials/Magnesium oxide board production machine/Siemens PLC control automatic Mgo board production line, cost accounting, installation and operation, equipment maintenance and the whole life cycle technical all support.
2. All-around technical service:
We provide technical formula for clients, to help clients to occupy the leading position
in the market.
3. Complete data specification:
Provide production line equipment technical data and instructions, and provide the Mgo board production line formula.
4. Quality commitment:
Our company regards product quality as the lives of enterprises, the main components
and wearing parts are made of high quality.
5. Trade service:
We can help the customer to do the consignment and the relevant procedure for import and export.
FAQ
Q1.What's your advantage? Why we choose you?
A:1)10 Years experience of test pen production and R&D.We have the most professional techniques and team. More advantage in price
2)Great production capacity Sustainable Supply . According to customer requirements, We support the customized.
3)The project is envoronmental protection.The main raw materials are from gricultural and industrial waste, such as crops straw, sawdust, fly ash, sand and etc. The products are absolutely ecological and low cost.
Q2.What's the Payment?
A:T/T would be better with quick transfer and few bank fees. LC could also be accept, but the procedure is complex and the fee is high.
Q3.Are you a factory or trading company?
A:We are a professional manufacturer. We are warmly welcome clients from worldwide to visit our factory and cooperate with us.
Q4.How long is the warranty of your equipment?
A:1 Year.
Q5.Do you supply spare parts?
A:Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year.
Q6.Will you provide training?
A:The training is free of charge , and our engineer will be on duty to train your worker.
Q7:How will you provide installation&commissioning?
A:Will provide 2~8persons(adjustable according to the degree of automatic )for installation.