DONYUE mini aac block plant machinery indonesia

Product Description
DonGYUE Machinery Group intorduction
1. Bricks AAC block production line introduction
In accordance with different main materials, we can design the production line, which is capable for annually producing 100,000 to 400,000m3 coal ash or sand autoclaved aerated concrete blocks. Here below is the production process of autoclaved aerated concrete block production line.
2. Slurry Making Machine for aac block machine
3.AAC Block Mchine Line Cutting Machine Simple Introduction
The aac block machine line cutting machine is developed based on the traditional cutting machine. It mainly refers to the WIHA technology. Its reducer and control elements are of domestic or international well-known brands, thus ensuring the stability of the machine.
4. AAC Block Machine Line Hydraulic Mould Crane
This hydraulic mould crane is the main corollary equipment in the aerated concrete production. It allows the bricks together with the mould to be placed on the concrete cutting machine for die sinking or demolding. The bricks will be cut by the concrete cutting machine. Meanwhile, the hydraulic mould crane will recombine and clean the concrete mould, bottom plate. Then, it will brush thestripping oil for re-pouring.
5. Autoclave Trolley for AAC block machine
The autoclave trolley is a delivery tool. It can convey the cut brick together with the side plate to or out of the autoclave. This device is adapted to the high-temperature and high-pressure environment. It resists deformation, and no stuck phenomenon appears.
6.AAC Block Machie Line production line detailed product description
1 Product weight is according to 600kg/m3 to control.
2 annual capacity 200,000M3.
3 set raw material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3.
4 water and material rate 0.631
5 one mould product 2.88M3
6 Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
7 casting slurry temperature 38-42 degree
8 body quiet stop. Time is 1.5-2.5housr, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa
9 Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours.
10. Cement lime fly ash style aerated block raw material proportion
7.AAC Block Machine Line Raw material proportion (sand and fly ash)
Name
Unit
Cement Lime Sand
Sand
%
55-65
Cement
%
10-20
Lime
%
20-30
Gypsum
%
2-3
Aluminum powder paste(600kg/m3)
1/10000
8
Water & material rate
0.65-0.75
Casting system
OC
35-38
Aluminum mixing time
S
30-40