Solid Surface Food Safe Epoxy Resin Panels Hardener Resin Low Price

Product Description


2Parts epoxy resin, by imported resin NPEL-128, defoamer, leveling agent, diluent and additives and other fine processing.When do large products should vacuum it. After curing, there is no ripple, no bubbles, good transparency, can be polished, indoor effective yellow resistance for more than 3 years, excellent surface effect.Solid Surface Food Safe Epoxy Resin Panels Hardener Resin Low Price

Model
991-A
991-B
Colour 
Transparent liquid
Transparent liquid
specific gravity 25 .C
1.15g/㎝3
 0.96g/㎝3
Viscosity 25.C 
4000-8000cps 
50cps
Shelf life
12months
12months
1. Super self-defoaming and bubble elimination are easier.2. Our AB glue in the same industry has lower odor and is more environmentally friendly.3. German Hensmith curing hardener and Taiwan South Asia resin makes it more environmentally friendly and yellowproof for a longer time.
4. No water fog, no oil fog, no puddles, no pits
5. Better hardness, scratch resistance, no edge shrinkage, no edge explosion6. High transparency high crystal clear glue7. The product has high solid content, the same weight is maintained after solidification of several grams of liquid, strong anti-current hanging and more rounded arc.8. Professional technical guidance, such as 100% qualified rate without operational and environmental reasons.

Proportion: A:B = 3:1 (weight ratio)
Usable time: 25*40 minutes (100g mixing volume)
Curing conditions: It takes 8-10 hours for the thickness of 1.5 centimeters to be completely cured at room temperature and 25 degrees Celsius, and 1.5 hours for the thickness to be completely cured at 55 degrees Celsius. The thinner the resin, the longer the solidification time (24-48 hours before complete solidification)


Curing characteristics:

Hardness
shore D 
> 82
Voltage withstand
KV/mm 
22
Bending Strength
Kg/mm2
28
Volumetric Resistance
Ohm 3
3 1 x 1015
Surface resistance
Ohmm2
5X1015
Ratio
g
A100:B33
Customer Feedback
We often get good feedback from our customers. 
"Resin Paint" is an innovation of modern home decoration.AB epoxy resin adhesive can be cured at room temperature and heating. Its main properties are good leveling, fast natural defoaming, long yellowing resistance, bright surface without ripple, and high transparency.We have own glue factory, according different customer needs, we can test change technical formula.We done Alibaba over 10years, experienced team service for you.

Detailed Images
How to use AB glue?Step1. Mix the glue according the ratio A:B=3:1(weight ratio, not volume ratio), then stir it continuously about 1-2minutes;Step2. Pour the glue on the album cover, spread evenly (Around 800-100g glue per square meter). 
1. Keep the operation room clean. The unused glue after opening the cover should cover the cover well.2. Frequent contact with this product will cause allergies to some people's skin, so try to wear rubber gloves when operating this product.3. If you enter the eye carelessly, please rinse it with plenty of water. If it is serious, please see a doctor immediately.4. Common production tools can be cleaned with alcohol or acetone.5. The curing time of the product can be accelerated by heating. The highest temperature is not more than 80 C.

Packing & Delivery


Free Samples