Epoxy Anchor Adhesive
Volume: 390ml
Mix Ratio: 3:1
Color: Red, Black
Density: 1.5±0.1g/cm³
Packing: 30 cartridges/carton
It's injected into holes with dispenser gun, by mixing part A and part B evenly, to plant rebars.
Application Range
• Structural connections with post-installed rebar (e.g. extension/connection to walls, slabs, stairs, columns, foundations, etc.)• Structural renovation of buildings, bridges and other civil structures, retrofitting and re-strengthening of concrete members possible.• Anchoring structural steel connections (e.g. steel columns, beams, etc.)
Technical Data Sheet
• Viscosity of Mixture:18-22Pa•S
• Splitting tensile strength ≥8.5MPa
• Bending strength ≥50MPa
• Compressive strength ≥60MPa
• Thixotopy index ≥4.0
• Distortion temperature ≥65℃
• Steel-steel tensile shear strength ≥16MPa
• C30,φ25, L=150mm condition tensile strength ≥11MPa
• C30,φ25, L=125mm condition bonding strength ≥17MPa
• Steel-steel T impact stripping length ≤25mm
How to Use Anchoring Adhesive?
• Drill hole
• Clean hole
• Brush hole
• Inject adhesive
• Plant rebar
• Curing