China automatic gypsum board production line machine low investment

China automatic gypsum board production line machine low investment
Company Information
COMPANY INTRODUCTION
Shandong Tengfei Mechanical and Electrical Technology Co., Ltd
located at the foot of the famous Mountain Tai, our company near
the Beijing to Shanghai high-speed, Beijing to Fuzhou High-speed,
104 State Road. We are a integrated science and technology
joint-stock enterprises, and we can design,manufacture
, install,commission gypsum board and gypsum powder and
gypsum block machine ourselves. At present, our company
have the ability to design and manufacture gypsum board
production line with annual capacity from 2 Million M2 to
50 Million M2, gypsum block production line with annual
capacity from 100,000 M2 to 1.5 Million M2, gypsum
powder production line and phosphogypsum powder
production line and FGD gypsum powder production
line and fluorine gypsum powder production line
with annual capacity from 30,000 tons to 500,000
tons, and we also can produce PVC laminated
gypsum board equipment and gypsum
board light frame equipment.
THE COMPANY ADVANTAGE
Shandong Tengfei Mechanical and Electrical Technology Co.,Ltd was established in 1998 and was professional and biggest in designing and manufacturing of gypsum machinery in China. we can design and manufacture and install and commission gypsum board machine,gypsum powder machine and gypsum block machine ourselves.Our gypsum board production line applies international up-to-date equipment, such as full-automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, fully automatic wrapping and booking device, auto packing system and so on.
We commit to improve competition, create brilliant culture and pursue continuous development. Being responsible for the customers, ensuring the quality of the products and abiding by the credit are our root of the industry. TENGFEI brand equipments have been on the top of the reliable machines in China. We supply all services such as market research, product design, after-sales service etc.
Our gypsum constructional machine with best quality and full automation, so it is very popular in China and abroad market, we have exported machine to the Middle East, Central Asia, West Asia, the Americas, Africa and some countries in Europe. And our customers are satisfied with our quality and service.
We can guarantee the quality and 100% successful commission.
Product Description
PRODUCT CATEGORIES
Product Overviews
Paper faced gypsum board production line adopts advanced technology. We adopts the horizontal flow, vertical airflow heat exchanger heating system, the raw material feeding system and edge cutting and edge sealing and edge grinding and recycling system and stacking system are all controlled by computer. All the whole line is full automation.

1 .Raw material supplying system
Raw material is transported and lifted to feeding hopper, after measurement it comes to vertical mixer. Face and back paperboard are lifted to each shelf. They are tensioned with special tension unit. Mixed material from vertical mixer falls down to back paperboard, then formed into shape and covered with face paperboard, after last flattening the semi finished plasterboard is completed.
2.Mixer
It will mix the raw material completely.
Vesicant and starch and powder and water will be blended in the mixer.


3.Conveying system
Semi-finished plasterboard from formation section is automatically edge trimmed into continuous palsterboard, conveyed to concreting station and automatically cut.
4. Transferring system
Transferring section Concreted plasterboard automatically transferred and cut in middle, saving raw material.

5. Drying system
Plasterboard Transferred automatically into drying room which has shelves 5-storey or 6-storey supporting 2 lapped sheets, with 50m, 60m, 70m, and 90meters length range.
6. Stacker system
Automatically cut into dimensions you pre-set to avoid defect product occurrence and higher efficiency.

7. Gypsum board controlling system
1.2 million m2/y~50 million m2/y
2. Automation Fully automatic
3. Drying system Using hot air for drying
4. Fuel: Coal, natural gas, heavy oil and diesel oil
Paper faced gypsum board production line adopts advanced technology. We adopts the horizontal flow, vertical airflow heat exchanger heating system, the raw material feeding system and edge cutting and edge sealing and edge grinding and recycling system and stacking system are all controlled by computer. All the whole line is full automation.

1 .Raw material supplying system

Raw material is transported and lifted to feeding hopper, after measurement it comes to vertical mixer. Face and back paperboard are lifted to each shelf. They are tensioned with special tension unit. Mixed material from vertical mixer falls down to back paperboard, then formed into shape and covered with face paperboard, after last flattening the semi finished plasterboard is completed.
2.Mixer

It will mix the raw material completely.
Vesicant and starch and powder and water will be blended in the mixer.


3.Conveying system

Semi-finished plasterboard from formation section is automatically edge trimmed into continuous palsterboard, conveyed to concreting station and automatically cut.
4. Transferring system

Transferring section Concreted plasterboard automatically transferred and cut in middle, saving raw material.



5. Drying system

Plasterboard Transferred automatically into drying room which has shelves 5-storey or 6-storey supporting 2 lapped sheets, with 50m, 60m, 70m, and 90meters length range.

6. Stacker system

Automatically cut into dimensions you pre-set to avoid defect product occurrence and higher efficiency.



7. Gypsum board controlling system


Contact us:
Jerry Shi
Mobile/wechat/whatsapp: 0086 15264835933
Skype: yuanxun.shi