IV Infusion Set with CE ISO 13485

Disposable infusion set
Product Description
Structure:
Spike cap, Spike, Air Vent, Drip chamber, Filter, Tube, Roller clamp,
Latex free Injection site , Connector luer lock, With / without needle
Options:
1. With or without Air vented
2. Transparent tube, DEHP-FREE tube
3. Latex injection bulb, Latex-free bulb, Y-site
4. Luer slip or luer lock connector
5. With or without needle (with cap if without needle)
Features:
1. With CE/ISO13485/ISO9001/GMP/FSC
2. Non toxic, Pyrogen-free, valid for 5 years
3. OEM products available
Operation Instruction
1.Open the individual packing and take out the infusion set
2.Firmly close roller clamp
3.Insert plastic spike into container
4.Press drip chamber to fill half of it
5.Open roller clamp and expel air bubbles
6.Close roller clamp again
7.Apply needle into patients vein
8.Adjust flow rate by roller clamp
9.Open air inlet if use glass container and close the air inlet if use soft container
10.Dispose properly as medical waste after use
The Main Structure and Performance:
1. Product is made with Medical Grade Polyethylene, ABS, PVS, Nylon and other
Non-toxic materials
2. Product is consist of Spike cap, Spike, Drip chamber, Air filter, Solution Filter,
Tube, Controller, Y-Site, Connector and Needle.
3. The product and initial packaging are produced in the 100,000 class purified
clean workshops. Product is sterilized with E.O gas, valid for five years.
4. This product is sterile, pyrogen-free, no hemolytic reaction, no acute systemic
toxicity.
Cautions:
1. Check the batch number and validity before use.
2. Tighten the needle before use
3. It is strictly prohibited to use if the single packing damaged or needle cap
drop off.
4. For single use only, use immediately after unsealed, destroy after use. It is
strictly prohibited to reuse.
Parts
Index
Material
Spike Cap
/
PE(polyethylene)
Spike
With air-vent
ABS
Drip Chamber
6ml
PVC DEHP-Free
Filter
Ø12.8 , Micron: 15um
Nylon
Predominant Tube
150cm
ID/OD:2.9mm/4.0mm
PVC DEHP-Free
Roller Clamp
45mm
PE(polyethylene)
Injection site
Bulb type
LATEX-Free Synthetic rubber
Connector
Luer lock (with cap)
Polypropylene
Needle
N/A
N/A
Packaging & Shipping
Packing
Unit
PE bag
20*10cm
Middle
25pcs/bag
46*25cm
Carton
500pcs/ctn
65*38*33cm
Weight
Gross/ ctn
12kg
Net / ctn
11kg
Loading
20ft
350ctns
175000pcs
40hc
840ctns
420000pcs
Sterile style
E.O Gas, Valid for 5 years
Certificate
CE / ISO13485 / ISO9001/ SFDA/ GMP/FSC
MOQ
100000pcs
Brand
Yiguang/ OEM
Company Information
Shandong Yiguang Medical Instrument Co., Ltd was established in 1988, mainly produce
medical consumables such as
*Disposable syringes
*Disposable infusion sets
*transfusion sets
*Scalp vein set
Our company was certified by CFDA, CE, ISO13485 and ISO9001, approved by GMP .