Infusion Sets or IV sets

Infusion Set
Structure: Spike cap, Spike ( wing type ), Air Vent, Drip chamber, Filter, Tube, Roller clamp,
Injection site, Connector, Needle

Features:
* With CE/ISO13485/ISO9001/SFDA/GMP/FSC
* Non toxic, Pyrogen-free, valid for 5 years
* OEM products available
Options:
1. With or without Air vented
2. With or without filter
3. Hard or soft drip chamber
4. 6ml, 8ml,12ml hard chamber
5. 20drops=1ml or 60drops=1ml
6. Transparent tube, elastic non-transparent tube, DEHP-FREE tube
7. Latex injection bulb, Latex injection cylinder, Latex-free bulb, Y-site
8. Luer slip or luer lock connector
9. Hypodermic needle or butterfly needle
10. With or without needle (with cap if without needle)
Product Standard: ISO8536-4:2010, ENISO13485:2003/AC:2009, GB 8368-2005
Specification
Parts
Index
Material
Spike Cap
/
PE(polyethylene)
Spike
With air-vent,Wing
ABS
Drip Chamber
8ml
PVC DEHP-Free
Filter
Ø13.2 , Micron: 15um
Nylon
Predominant Tube
150cm
ID/OD:2.9mm/4.0mm
PVC DEHP-Free
Roller Clamp
45mm/52mm
PE(polyethylene)
Injection site
Bulb type
LATEX-Free Synthetic rubber
Connector
Luer lock (with cap)
Polypropylene
Needle
21G/22G/23G
PP+Stainless steel
Operation Instruction
1. Open the individual packing and take out the infusion set
2. Firmly close roller clamp
3. Insert plastic spike into container
4. Press drip chamber to fill half of it
5. Open roller clamp and expel air bubbles
6. Close roller clamp again
7. Apply needle into patients vein
8. Adjust flow rate by roller clamp
9. Open air inlet if use glass container and close the air inlet if use soft container
10. Dispose properly as medical waste after use
Cautions:
1. Check the batch number and validity before use.
2. Tighten the needle before use
3. It is strictly prohibited to use if the single packing damaged or needle cap drop off.
4. For single use only, use immediately after unsealed, destroy after use. It is strictly prohibited to reuse.
Packaging & Shipping
PE bag
Plastic film bag
Paper-plastic packing
<img
<img
Certificates