For Inkjet printer A4 Size Transfer paper for DIY tattoo

Product Description
Feature
Process
4. Cutting (Note: Cut all round,otherwise part of the edge of the cover coat will stick the paper and it is difficult to
demon.)
5. Put it in the water for 30 to 60 seconds to make paper and transfer printing film separation, sliding pattern (up).
6. Transfer printing design.
7. After carefully squeegee out the bubble (squeegee out the bubble with a business card
after positioning), use the dry cloth or tissue lightly cleaning the surface and the water.
8. Put into the oven, baking temperature 100-120 degrees Celsius, 10 to 15 minutes.

Baking
1. High temperature resistant material such as ceramic baking temperature 100-120 degrees,10 to 15 minutes.Due to metal's strong thermal conductivity,100 degrees Celsius baking is ok.Not high temperature resistant like plastic need to bake 50-70 degrees Celsius, for candles, flowers directly to dry. 


2. The large goods which is not convenient to put in the oven,directly dry it naturally is ok, but it can not meet best adhesion.Warm prompt: Low temperature drying most of the water, and then set to the specified temperature baking, or dry naturally,then baking, so that we can avoid to produce the bubbles.
Detailed Images
Our product
UV LED water transfer ink
solvent glass ink
UV LED plastic ink
water transfer paper 
hot stamping decal
water transfer decal
UV LED curing machine
screen printing machine
Hot stamping foil machine
Contact us